Replaces

2004-15 Nissan Titan Tail Light Passenger Side - 1ALTL00545

This replacement tail light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger side)
    • Mounts on Quarter Panel
  • Replaces dealer Part Numbers: 26550-ZH226, 26550ZH226
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included
  • Fits Models WITH In Bed Utility Compartment

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:36)
    • Remove the 10mm bolts from the tail light bracket
  2. step : Servicing the Bulbs (0:49)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Removing the Tail Light Harness (1:15)
    • Disconnect the tail light wiring harness from the truck
    • Disconnect the tail light wiring harness
    • Remove the gasket
    • Pull the tail light and the wiring harness out
  4. step : Installing the New Tail Light (1:59)
    • If the new tail light has clips remove the old clips from the truck with pliers
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts into the tail light bracket
    • Reconnect the tail light wiring harness
    • Re-clip the wiring harness to the truck

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
product was exactly what I needed. came quickly and just a couple more dollars then getting it used from an auto wrecker. will go through these guys again
April 5, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2015 Nissan Titan Tail Light Passenger Side for Models with Utility Bed

This part replaces:

  • Partslink NI2801166
  • Hollander 166-59640R
  • OE # 26550ZH226
  • DEPO 315-1948R3US
Part #: 1ALTL00545

How-to Video:

(03:14 min)