In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:08)
    • Hold the 19mm bolt at the bottom of the strut with a 19mm wrench
    • Remove the 19mm nut with a ratchet and a piece of pipe for leverage
    • Knock the bolt out with a punch and a hammer
    • Remove the three 14mm nuts from the top of the strut
    • Use a hammer to knock the strut out of place
    • Pull the strut down and out
  3. step : Installing the New Strut (2:29)
    • Push the new strut up into place
    • Insert the three 14mm nuts onto the top of the strut
    • Hammer the lower end of the strut into place
    • Push down on the wheel knuckle as you push the 19mm bolt into place
    • Tighten the 19mm nut onto the 19mm nut
    • Tighten the lower nut to 100 foot-pounds of torque
    • Tighten the upper nuts to 25 foot-pounds of torque
  4. step : Reattaching the Wheel (3:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Center Punch
  • Jack Stands
  • Floor Jack
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 19mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Nothing but good things to say about 1A!
I ordered front stuts and rear shock absorbers for my 2005 Nissan Titan. First or all the price was unbelievable to the point where I started to question if the quality was going to suffer. But to my surprise the parts arrive 3days later and they were actually very good quality parts! Installation went without a hitch. The videos are helpful as well. I will be ordering more parts for 1A auto.
March 22, 2017
Purchased
11 months ago
Great replacment parts!
Parts came very quickly, had no trouble on install. Haved hundreds from stealerships and costly local repair shops.
was quoted for parts and labor- 1,000 from dealer and 800 from local shop.
I purchased these for 161.95 and free shipping, and took me 1 1/2 hrs using the do it yourself videos on 1A's site. My Titan came back to life, it stands taller and the ride is so smooth now. It's back to the way it left like when I first bought the truck in 2010.
I am extremely happy with this purchase.
Thanks 1A Auto, you guys are GREAT"."
September 14, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
If I���m reading this correctly, these do fit a 2010 Nissan Titan RWD?
Jeff M on Jan 23, 2018
BEST ANSWER: They fit my 2008 perfect but they are the stiffest shocks and struts I've ever seen

How-to Video:

(04:29 min)

Tools List:

    General Tools

  • Center Punch
  • Jack Stands
  • Floor Jack
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 19mm Wrench



This part replaces:

  • Monroe 171358
  • Monroe 37252
  • KYB 345042

Vehicle Fit

  • 2004-2015 Nissan Titan Rear Wheel Drive Front & Rear Shock & Strut Kit 4 Piece Set
Part #: 1ASSP01365

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More