1ASFK03301-2004-10 Toyota Sienna Suspension Kit 6 Piece Set


2004-10 Toyota Sienna Suspension Kit 6 Piece Set TRQ PSA56358


Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 6 Piece Set

This part replaces:

  • Beck Arnley 101-5216
  • Dorman 521-813
  • Dorman 521-814
  • Hollander 512-58712L
  • Hollander 512-58711R
  • Moog K80249
  • Moog K90346
  • Moog K90347
  • OE # 4333009560
  • OE # 4333009160
  • OE # 4334009010
  • OE # 4882008020
  • OE # 4806908021
  • OE # 4806808021
Save 23%
List: $184.95 Save: $43.00
Part 1ASFK03301
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA56358
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Lower Control Arms
      (2) Front Sway Bar Links


  • Brand New Steering & Suspension Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards


Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:24)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with a 21mm socket and breaker bar
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Ball Joint (1:12)
    • Apply rust penetrant to the ball joint nuts and bolt
    • Loosen the two ball joint nuts with a 17mm socket and breaker bar
    • Loosen the ball joint bolt with a 17mm socket and breaker bar
    • Remove the cotter pin from the ball joint castle nut with needle nose pliers and side cutters
    • Drive the cotter pin out of the castle nut with a hammer and punch
    • Loosen the castle nut with a 19mm wrench and a dead blow hammer
    • Strike the wheel knuckle with a small sledge hammer
    • Remove the two 17mm nuts from the ball joint
    • Remove the 17mm bolt from the ball joint
    • Separate the ball joint from the control arm
    • Pry the ball joint out of the wheel knuckle with a pry bar
    • Remove the castle nut from the ball joint
    • Pull the ball joint out of the wheel knuckle
  3. step : Installing the Ball Joint (6:42)
    • Remove the cotter pin and castle nut from the new ball joint
    • Clean any grease from the wheel knuckle
    • Slide the ball joint into the wheel knuckle
    • Start the castle nut onto the ball joint by hand
    • Slide the ball joint studs into the control arm
    • Start the two 19mm nuts onto the ball joint studs by hand
    • Start the 17mm bolt into the control arm
    • Tighten the castle nut with a 19mm wrench
    • Line up the castle nut with the cotter pin hole
    • Insert the cotter pin into its hole
    • Fold over the cotter pin with pliers
    • Tighten the 17mm bolt
    • Tighten the two 19mm nuts to 55 foot-pounds of torque
  4. step : Installing the Wheel (9:32)
    • Slide the wheel onto the hub
    • Start the lug nuts with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel
    • Pump the brake pedal until it feels firm

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Sledge Hammer
  • Center Punch
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Ball Joint Press
  • Dead Blow Hammer

  • Wrenches - Metric

  • 19mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2004-2010Toyota Sienna Toyota Sienna Suspension Kit 6 Piece Set

Part Interchange

Brand Label Part Number
Beck / Arnley 102-7011
Beck / Arnley 101-5216
Beck / Arnley 102-7012
Beck/Arnley 102-7012
Beck/Arnley 102-7011
Beck/Arnley 101-5216
DIY Solutions SUS00291
DIY Solutions SUS06299
DIY Solutions SUS05712
DIY Solutions SUS00290
DIY Solutions SUS05711
Dorman - OE Solutions 521-813
Dorman - OE Solutions 521-814
Dorman OE Solutions 521-813
Dorman OE Solutions 521-814
Ingalls Engineering CAK620713
Ingalls Engineering CAK620714
MAS Industries CA74314PR
MAS Industries CA74313
MAS Industries CA74313PR
MAS Industries CA74314
MOOG RK620713
MOOG K90346
MOOG K90347
MOOG K80249
MOOG RK620714
MOOG Chassis Products K90346
MOOG Chassis Products RK620713
MOOG Chassis Products K80249
MOOG Chassis Products RK620714
MOOG Chassis Products K90347
Mevotech MS86170
Mevotech CMS86169
Mevotech GS86169
Mevotech GS86170
Mevotech CMS86170
Mevotech MS86169
NAPA Premium 2606392
NAPA Premium 2606391
Precision Driveline CB86100
Precision Driveline 5CB86099
Precision Driveline CB86099
Precision Driveline 5CB86100
Raybestos Chassis 507-1853
Raybestos Chassis 507-1854
SYD 1525031
SYD 1525030
Toyota 4806908020
Toyota 4806908021
Toyota 4806808020
Toyota 4806808021
Toyota OEM 4806908020
Toyota OEM 4806808020
Toyota OEM 4806808021
Toyota OEM 4806908021

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA56358
Product Reviews
5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great parts and great fit!
These parts arrived super fast as advertised and quality seems very good. Price was very reasonable also. Keep up the great work 1A Auto!!
February 8, 2017
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

2004-10 Toyota Sienna Suspension Kit 6 Piece Set TRQ PSA56358-1ASFK03301 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.