This replacement mirror is just what you need to get your vehicle in good working condition again!

Specifications:

  • Fits LH (Driver Side)
  • Power mirror
  • Replaces dealer part number: 87940AE010, 87940 AE010
  • Injection molded black plastic housing
  • Direct replacement
  • Built to strict quality control standards
  • Non-Heated

This mirror makes a great replacement and has good cost savings over a dealer part.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:52)
    • Pry off the plastic trim at the top of the door panel.
    • Pry between the lock and bezel behind the door handle and remove the bezel.
    • Remove the three Phillips screws in the door panel.
    • Pry out and turn the Phillips head center on the clip on the side of the door panel.
    • Lift the door armrest up and off.
    • Disconnect the switch panel harness.
    • Remove the uncovered Phillips screws and remove the cup.
    • Remove the Phillips screw under the cup.
    • Pry out the door panel starting at the lower inside corner. Release the clips around the door panel.
    • Lift the door panel up and out.
    • Disconnect the harnesses and the door handle rod.
  2. step : Removing the Side Mirror (4:35)
    • Disconnect the harness.
    • Remove the three 10mm nuts.
    • Pull the mirror off.
  3. step : Replacing the Side Mirror (5:22)
    • Put the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the 10mm nuts.
    • Connect the mirror harness.
  4. step : Replacing the Door Panel (7:13)
    • Reconnect the harnesses and the door handle cable.
    • Push the panel down into place.
    • Line up the clips and hit them into place.
    • Replace the Phillips screw in the door cup hole.
    • Replace the door cup and screws.
    • Replace the screw behind the door handle.
    • Reconnect the switch panel.
    • Push the armrest panel into place front first.
    • Replace the screws.
    • Replace the clip on the side of the door panel.
    • Replace the door handle bezel.
    • Replace the trim panel at the top of the door panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.8 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
1
0
0
0
Excellent place for purchase
The website with a video of the installation is awesome. The product was shipped promptly and arrived in a good condition
June 10, 2018
Purchased
4 weeks ago
Stone Axe simple
Perfect fit. Install video invaluable. My mirror came with some rubber gasket tape but there was no instruction on what to do with it? Wasn't in the video. At any rate, its working fine as installed and am quite happy!
January 17, 2018
Purchased
5 months ago
Wonderful company! Will use them again.
The part was delivered quickly and easy to install. I was happily surprised that there was a demo on the website and the cost was excellent! Thank you.
June 21, 2017
Purchased
1 year ago
Great replacement part
I highly recommend buying replacement parts from 1A Auto. This was my second time around and each time the part has been a perfect fit. I was able to install myself both times using their detailed & easy to follow intructional videos.
April 2, 2017
Purchased
1 year ago
Toyota Sienna mirror drivers side
Part came on time . Packed very well. Worked like a charm. Price was very good. Completely satisfied
March 13, 2017
Purchased
1 year ago
Make Sure You Get the Right Mirror (heated or not heated)
Actually the mirror is great, though I accidentally got the non-heated. I didn't realize my old mirror was heated until I cut it apart and saw two wires attached to the mirror plate. Having said that, the non-heated mirror works just fine. All the controls work and the video on youtube from 1aauto gave me all the information I needed (though you don't have to completely remove the door panel.)
January 25, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2010 Toyota Sienna Power Mirror Driver Side

This part replaces:

  • Partslink TO1320201
  • Hollander 128-61417L
  • OE # 87940AE010
  • TYC 5350132
  • DEPO 312-5424L3EB
Part #: 1AMRE01534


How-to Video:

(10:54 min)