Replaces

2004-10 Toyota Sienna Interior Door Handle Pair - 1ADHS00629

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Beige
  • Quantity:   Pair

These inside door handles are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 69205-AE010-E1, 69206-AE010-E1, 69205AE010E1, 69206AE010E1
  • Smooth Beige Finish
  • Direct replacements
  • Built to strict quality control standards

These inside door handles are great replacements and have good cost savings over the dealer units.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:38)
    • Pry off the trim piece at the front top corner of the door panel with a flat blade screwdriver
    • Pull the door handle back and remove the inner door handle bezel
    • Remove the two Phillips head screw inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Remove the plug from the side of the panel with a Phillips screwdriver
    • Pry up the door pull and window switch panel by hand
    • Disconnect the window switch harnesses by pulling back on the plastic ears
    • Remove the two Phillips screws from the door pull cup
    • Remove the Phillips screw from the plastic beneath the cup
    • Pull the door panel out firmly by gripping the lower part
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
    • Disconnect the courtesy light wiring harness
  2. step : Removing and Installing the Door Handle (3:43)
    • Pop the inside door handle out front first
    • Push the back in first and push the new door handle in
  3. step : Reinstalling the Door Panel (4:09)
    • Connect the courtesy light wiring harness
    • Connect the latch cables from the door handle
    • Test the door handle lock
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw from the plastic beneath the cup
    • Insert the two Phillips screws from the door pull cup
    • Insert the Phillips head screw inside the door handle
    • Connect the window switch harnesses by pulling back on the plastic ears
    • Push in the door pull and window switch panel by hand
    • Insert the two Phillips head screw inside the door pull
    • Press in the plug from the side of the panel by pressing the center
    • Pull the door handle back and insert the inner door handle bezel
    • Push in the trim piece at the front top corner of the door panel with a flat blade screwdriver

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2010Toyota Sienna Toyota Sienna Front Beige Interior Door Handle Pair
Part #: 1ADHS00629

Out of Stock

How-to Video:

(07:51 min)