2004-09 Toyota Prius Wheel Bearing & Hub Assembly Front Pair TRQ BHA53630 - 1ASHS00553

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair
  • Front or Rear Location:   Front

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 4 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 43510-47010, 43510-47011, 4351047010, 4351047011
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Happy customer
As a small preowned automobile dealer I purchase a lot of parts, some locally and some online. This company 1Aauto always has the lowest prices (which is a major factor to me) and quality parts. An additional bonus is although unpromised, their standard free shipping always arrives incredible fast. Many times the next day. May just be my location but I am a happy customer.
July 9, 2018
Great product and price
I install this wheel bearing the noise was gone and finally fixed, I went to the dealer they want to charge $700 for one sided only, I save a lot of money thanks
August 26, 2018
Great products, smooth delivery.... thank you!!
Thank you for providing quality products at reasonable prices. The bearing assemblies for my 2006 Toyota Prius fit perfectly! Been driving my car for almost 3 weeks now and e everything is going well.... thank you!!!
September 17, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How do I know if I need the whole assembly or just the spindle?
Tom M October 30, 2018
If it is making significant noise- abruptly swing steering side to side at 35 mph or so- if the noise stops briefly during change of direction then go ahead and change bearing assembly on both sides. These units are rugged and inexpensive, however they are difficult to remove from the aluminum arm after years of service my originals lasted over 250000 miles
E N October 30, 2018
We suggest taking your vehicle to a nearby reputable shop to identify the issue. Once you know the cause, well be happy to see if we carry the parts and how-to videos needed for your repair.
Andra M October 30, 2018
The parts are all integrally dependent, related, connected. Furthermore, this is not a job you want to do again or half-way. These are the reasons this replacement item comes as a kit; in fact, my order included an assembly for both left and right sides (they are the same). Therefore, it is a no-brainer to replace both bearing and spindle.
Erland L October 30, 2018
For me this question boils down to, do you have the ability to press the wheel bearing on and off? The hub and spindle would only have to be replaced if they were damaged somehow, like in an accident. The problem for most people is being able to change the bearing without causing any damage to the spindle or hub, or having the time to take it to a shop to have it done on a press. Getting the whole assembly, especially at a great price, you end up with everything being new, no time wasted cleaning the old parts and the time for the repair is greatly reduced.
Tony W October 31, 2018
By "spindle" are you referring to the wheel hub? The hub comes without the bearing and is what would fit underneath your brake rotor/wheel on one end and drive shaft on the other end. If you have a means of pressing in/out bearings then you might just need the bearing and you could reuse the hub. If you have access to a [bearing] press and can remove the entire assembly then you could save yourself some $$ I found it easier to just replace the entire assembly. My assembly needed to be removed and pressed out from the steering knuckle as they were welded together with rust and debris. Hope that helps your decision.
David Dylan L November 1, 2018
Year Make Model Description
2004-2009Toyota Prius Toyota Prius Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00553

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA53630