Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement tail light is just what you need to get your Durango in good looking form again!

This Dodge Durango tail light features the following specifications:

  • LH (Driver side)
  • Replaces dealer part number: 5133169AH
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Red and White in color as original

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation tail lights. Go with superior quality!

This Durango tail light makes a great replacement and has good cost savings over a dealer unit.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight (0:37)
    • Open the tailgate.
    • Pry the center of the clips out on the taillight and pry the rest out.
    • Pull the taillight out.
    • Disconnect the harness.
  2. step : Replacing a Bulb (1:38)
    • Remove the T25 bolts from the connector plate.
    • Pull the plate free.
    • To replace the bulbs pull them straight out and push the new one in.
  3. step : Replace the Taillight (2:05)
    • Put the connector plate onto the new taillight assembly.
    • Replace the T25 screws.
    • Reconnect the harness.
    • Push the taillight into place.
    • Replace the clips.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T25 Torx Driver

3.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
1
0
Not complet
Needed the 2 grouments on the left side. Had to go to dealer and they said they should have come with it. Had to special order
February 23, 2017
Eh
The stock screws for the light strip didnt fit in the holes for the new one. Didnt want to deal with the hassle of returning so I just used duct tape. Would have rather had a good fit on my first order from 1A. Maybe it is just because I was working on a dodge and everything seems to be more of a pain when Im doing that.
March 7, 2017
The taillight was mailed to me in an adequate amount of time. The quality of the product that was sold to me was excellent
March 22, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2009Dodge Durango Dodge Durango Tail Light Driver Side
Part #: 1ALTL00371


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:24 min)