2004-08 Nissan Maxima Window Regulator - 1AWRG01231

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power


  • Fits RH (Passenger Side) Front
  • Power operation
  • Does not include the power window motor

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:45)
    • Use your flat blade screwdriver and pry up the screw cover behind the door latch.
    • Pry up the switch panel in the door pull and disconnect the wiring harness.
    • Once again with your flat blade screwdriver, pry up the panel on the door pull.
    • Unbolt the 3 exposed 10 mm bolts using your socket and ratchet.
    • From the edges of the door panel, start prying it off with your hands.
    • Unclip the door latch and lock rods and unplug the wiring harness from the speaker and courtesy light.
  2. step : Remove the window regulator and motor (3:11)
    • Unplug the wiring harness to the window motor, using a flat blade screwdriver to unplug it.
    • Unclip the wiring harness from the inside of the door.
    • Remove the 10 mm bolts anchoring the stamped metal inner inside door panel.
    • Unbolt the four bolts securing the regulator rails and the three bolts securing the motor.
    • Pull the stamped panel away from the door and unbolt the window from the regulator.
    • Make sure you hold onto the window so it doesn’t fall, then you can tape it up with painters tape.
    • Remove the window regulator and motor.
    • Carefully separate the motor from the regulator and either install the good motor to the new regulator or the new motor motor to the good regulator.
    • Use a 7 mm socket and ratchet to unbolt the motor.
  3. step : Install the regulator and motor (7:45)
    • Bolt the motor and regulator to the stamped panel.
    • Thread the wiring harness through the stamped panel.
    • Bolt the stamped panel back into the door.
    • Clip the wiring harness back to the stamped panel.
    • Plug the switch panel back in and roll the window regulator clips to line up to the access ports.
    • Untape your window and lower it down to the window regulator clips and bolt it in with your socket and ratchet.
    • Test that your window rolls up and down ok.
    • Unplug the switch panel.
  4. step : Install the door panel (12:50)
    • Plug in your wiring harnesses and clip in your door latch and lock cables.
    • Clip your door panel back on, making sure to thread through your switch panel wiring.
    • Bolt in the 10 mm bolts to secure the door panel.
    • Plug in the switch panel and clip it in.
    • Clip down the door pull panel and little plug in the door latch.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Nissan Maxima 2004 Passenger Window Regulator
1A Auto Customer Service was very helpful expediting my order. The part came in on time as promised. The installation video published by 1A Auto on how to install the parts I have ordered was very thorough and helpful. No doubt that I have saved a lot of money for doing it myself rather than having it installed by the car dealer.
October 29, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2008Nissan Maxima Nissan Maxima Front Power Window Regulator without Motor Passenger Side
Part #: 1AWRG01231

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:35 min)