This replacement tail light pair is just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacements
  • Built to strict quality control standards
  • Red and White in color as originals

We have noticed that there are many inferior quality Tail lights on the market. We have researched other Tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket Tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This light pair makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Taillight Assembly (0:45)
    • Pry out the middle of the plugs and pull them out.
    • Pull the trim back.
    • Disconnect the harness.
    • Remove the two 8mm nuts.
    • Push the plug through.
    • Pull the taillight out and off.
  2. step : Changing a Bulb (2:20)
    • Twist the socket out counterclockwise.
    • Pull the bulb straight out.
    • Push a new bulb in.
    • Twist the socket clockwise to lock.
  3. step : Replacing the Taillight Assembly (2:33)
    • Remove the four Phillips screws on the trim panel.
    • Put the trim panel onto the new light and replace the four Phillips screws.
    • Push the harness and plug through.
    • Line up the taillight and press it into place.
    • Replace the two 8mm nuts.
    • Reconnect the harness.
    • Put the trim back into place.
    • Replace the two plugs.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2008 Nissan Maxima Outer Tail Light Pair

This part replaces:

  • OE # 265207Y025
  • OE # 265257Y025
  • Partslink NI2801160, NI2800160
Part #: 1ALTP00168

How-to Video:

(04:54 min)