Replaces

2004-08 Nissan Maxima Steering & Suspension Kit - 1ASFK05835

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:58)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the sway bar links (1:17)
    • Hit the bolts with penetrating oil.
    • Use a 17 mm socket and 19 mm wrench to remove the bolt on each end of the sway bar link.
  3. step : install the new sway bar link (2:41)
    • Feed your sway bar link into place.
    • Thread the nuts and bushings.
    • Tighten up both bolts with your 17 mm socket and 19 mm wrench.
  4. step : put your wheel back on (3:15)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2008 Nissan Maxima Steering & Suspension Kit 8 Piece Set

This part replaces:

  • Monroe 172241
  • Monroe 172242
  • KYB SR4163
  • KYB SR4164
  • Hollander 527-60361R
  • Hollander 527-60362L
  • OE # 485200M025
  • OE # 485200M085
  • OE # 485217Y000
  • OE # 485218J000
  • OE # 546188J000
  • OE # 546688J000
  • Moog ES3438
  • Moog EV427
  • Moog K90352
  • Moog K90353
Part #: 1ASFK05835


How-to Video:

(03:52 min)