Replaces

2004-08 Chrysler Pacifica Suspension Kit - 1ASFK02123

These replacement front lower control arms & sway bar links are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a SET of 4
    • (2) - FRONT LOWER Control Arms with Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacements.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Very excited
At first was a little bit skeptical about purchasing from this site. After receiving the parts I'm extremely pleased the quality of the product is amazing. I received updates every time the parts moved that was great and comforting. Will be using them in the future for all my clients and my own vehicles as well.
September 5, 2017
Purchased
9 months ago
suspension kit
Brought 2 quick struts, 2 lower control arms, & 2 sway bar links. OEM products fot like a glove. Rides very well. Great quality
July 13, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
does this fit a 2007 pacifica?
dustin w on Feb 16, 2016
BEST ANSWER: As the title states: 2004-2008 Chrysler Pacifica Front Lower Control Arm & Sway Bar Link (Set of 4)yes these are correct for your model.

You can follow this link to the basic listing of the part, then add your year, make, and model
http://www.1aauto.com/2004-08+Chrysler+Pacifica+Control+Arm+%26+Sway+Bar+Link/I/1ASFK02123

Vehicle Fit

  • 2004-2008 Chrysler Pacifica Suspension Kit 4 Piece Set

This part replaces:

  • OE # 4743021AA
  • OE # 4743454AA
  • OE # 4743669AA
  • Hollander 512-01394L
  • Hollander 512-01393R
  • OE # 4743476AE
  • OE # 4743476AF
  • OE # 4743476AI
  • OE # 4743477AE
  • OE # 4743477AF
  • OE # 4743477AI
  • Moog K621361
  • Moog K621362
  • Reference Number MS25179
  • Reference Number MS25180
  • Dorman 521-595
  • Dorman 521-596
  • OE # 4743477AE, AF, AI
  • OE # 4743476AE, AF, AI
  • Moog K7258
Part #: 1ASFK02123


How-to Video:

(07:55 min)