2004-08 Chrysler Pacifica Steering & Suspension Kit 8 Piece Set TRQ PSA58736 - 1ASFK01243

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Lower Control Arms with Ball Joints
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a Set of 8
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Hex Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5 Stars ?? ????????
I installed the parts. And I have to tell you it was a success. Thank you for having my back. Your company sells very good and reliable parts. Thank you so much ??
October 28, 2018
Good product
Well I really needed a front end on my Pacifica and didn’t really have the money to spend to fix it the way I wanted to. I search for parts online since a friend told me it would be a lot cheaper and found these. Took a risk and purchased them but found that risk was gold. I thank god that they were parts that were worth installing!
April 18, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this all Ill need no hidden parts?
Lionel D August 19, 2017
Its been a couple years since I put it on, but I believe it came with everything but the grease.
WILLIAM B August 19, 2017
Youll need to reuse some parts from the car like the inner tire rod boot, so make sure thats yours is still intact. Other than that, you wont need anything else.
I B August 19, 2017
If you are buying these parts you should also be buying the hub and strut kit.and sway bar bushing kit.
T O August 19, 2017
Yes this is all you will need no extra parts or hardware is needed
J W August 22, 2017
You will need to re use the mounting hardware, but a large portion of the front suspension is included in this kit for replacement.
Alex P August 25, 2017
Year Make Model Description
2004-2008Chrysler Pacifica Chrysler Pacifica Steering & Suspension Kit 8 Piece Set TRQ PSA58736
Part 1ASFK01243
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: PSA58736