This replacement tail light is just what you need to get your Van in good looking form again!

This tail light features the following specifications:

  • LH (driver's side)
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Chrysler mini van tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight Assembly (0:34)
    • Pry out the center of the pins and pull the pins out on the side of the taillight.
    • Pull the taillight out,
    • Pry out the lock tab on the harness.
    • Disconnect the harness.
  2. step : Replacing a Bulb (1:32)
    • Squeeze the tabs and pull the socket out.
    • Pull the bulb out.
    • Push the new one in.
    • Push the socket back into place.
  3. step : Replacing the Taillight (1:52)
    • Connect the harness to the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the two pins.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Perfect
Some out of control speeder took out my rear light. I got the part so easily from 1aauto.com. Half the price of parts store. Got 1aauto in two days free delivery. Their video was right on and install was done in ten minutes.
January 22, 2018
Purchased
5 months ago
Fast & Easy
I ordered this tail light replacement for a friends van. After ordering I watched the installation video twice. When the tail light arrived 2 days later it took more time to open and unpack the box than the installation job itself. Everything worked perfect and I was the hero thanks to 1A Auto.
October 30, 2017
Purchased
8 months ago
Very helpful
Making auto repairs available to all with a little video help!
September 25, 2017
Purchased
9 months ago
Helpful and economical
Needed a tail light to pass Maryland inspection. I have been looking over the self help videos from 1A Auto parts, How to clean up the headlights. Decided to give !A a try. Service better than promised, and a great Price. Will use again.
August 8, 2017
Purchased
10 months ago
Good Stuff!
Fast delivery, great product, about half what I'd pay through the dealer for a replacement, the You Tube video let me install it myself, thank you so much 1aauto.com!
February 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Do these tail lights use the EXACT same OEM bulbs ?
And , Do you just twist and turn the bulb holder to change the bulb ?
Kaa Z on Feb 4, 2018
BEST ANSWER: Yes they use the exact bulb. It replaces the old bulb holder with a better style. That holder's contacts failed on the OEM one so I was happy I found this doesn't use the same holder.

Vehicle Fit

  • 2004-2007 Chrysler Town & Country Tail Light Driver Side
  • 2004-2007 Dodge Caravan Tail Light Driver Side
  • 2004-2007 Dodge Grand Caravan Tail Light Driver Side

This part replaces:

  • Partslink CH2800157
  • Hollander 166-02098L
  • OE # 4857955AA
  • TYC 11-6028-00-1
  • DEPO 333-1940L-AF
Part #: 1ALTL00317

How-to Video:

(03:58 min)