Specifications:

  • Comes as a PAIR
    • LH (Driver Side) and RH (Passenger Side)
      • Mounts on the side of the front bumper
  • Replaces dealer part numbers: 26105-7Y000, 26105-7Y001, 26100-7Y000, 26100-7Y001, 261007Y000, 261007Y001, 261057Y000, 261057Y001
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Corner Light (0:42)
    • Remove the two Phillips screws underneath the bumper
    • Remove the wheel well panel
    • Disconnect the wiring lead from the light
    • Remove the two 8mm bolts from the light
    • Pinch the tabs and remove the corner light from its cover
  2. step : Servicing the Bulbs (2:26)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the Corner Light (2:50)
    • Push the corner light in place
    • Push the cover onto the corner light
    • Insert the two 8mm bolts to the light
    • Connect the wiring harness
    • Insert the two Phillips screws underneath the bumper

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2006 Nissan Maxima Corner Light Pair

This part replaces:

  • Partslink NI2593116, NI2592116
Only 5 left in stock
Part #: 1ALPP01027

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:33 min)