Specifications

  • Left Hand (Driver Side)
  • Replaces dealer part number: 4806037AF
  • Includes lens & housing
  • Bulbs not included
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Headlight (0:39)
    • Remove the two 8mm bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the two headlight wiring harnesses
  2. step : Replacing the Headlight Bulbs (2:00)
    • This step is only necessary if you are replacing the headlight bulbs
    • Twist off the locking boot
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Installing the New Headlight (2:42)
    • Reconnect the wiring harness to the headlight
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 8mm bolts into the headlight bracket
    • Move the headlight screw clockwise or counterclockwise to raise or lower the light beam

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2006 Chrysler Sebring Convertible Headlight Driver Side
  • 2004-2006 Chrysler Sebring Sedan Headlight Driver Side

This part replaces:

  • Partslink CH2502150
  • Hollander 114-00814L
  • OE # 4806037AF
  • TYC 20-6540-00-1
  • DEPO 333-1174L-AF
Part #: 1ALHL01065



How-to Video:

(03:44 min)