2004-06 Chrysler Pacifica Window Regulator - 1AWRG01481

This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

• RH (Passenger Side) FRONT
• Includes the power window motor
• Replaces dealer part numbers: 4894270AC, 4894270AB
• Direct replacement
• Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Installation:

• This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
• You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

• 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
  • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

• Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
• It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
• Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

• Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
• Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Build to strict quality standards

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Door Panel (0:39)

• Pry off the trim piece inside the door handle with a flat blade screwdriver
• Pry off the trim piece inside the door pull with a flat blade screwdriver
• Remove the Phillips head screw inside the door pull
• Remove the Phillips head screw inside the door handle
• Pry out the door panel with a door panel clip tool or putty knife
• Lift the door panel up and off
• Disconnect the speaker wiring lead
• Disconnect the door lock wiring harness
• Disconnect the window switch wiring harnesses
• Disconnect the latch cables from the door handle
• Disconnect the courtesy light wiring harness
• Disconnect the side rear view mirror wiring harness
• Remove the three Phillips head screws from the speaker
• Disconnect the speaker wiring lead
• Remove the speaker
• Remove the Phillips head screw from the bracket
• Remove the bracket
• Remove the two Phillips head screws from the bracket
• Remove the bracket
• Carefully peel off the water shield

step : Removing the Window Regulator (5:01)

• Loosen the two 10mm bolts that hold the window to the regulator
• Raise the window by hand
• Hold the window in place with painter's tape
• Disconnect the window motor lead
• Remove the three 10mm bolts from the regulator
• Remove the two 10mm bolts from the window track
• Pull the window regulator out through the door

step : Reinstalling the Regulator (7:26)

• Insert the bolts into the window regulator
• Push the regulator into the door
• Hang the regulator by its bolts
• Tighten the four 10mm bolts into the regulator
• Tighten the two 10mm bolts into the window track
• Remove the painter's tape from the window
• Lower the window onto the regulator
• Tighten the two 10mm bolts that hold the window to the regulator
• video
• Connect the window motor lead

step : Reinstalling the Door Panel (10:14)

• Put the water shield into place
• Put the speaker into place
• Insert the three Phillips screws into the speaker
• Connect the speaker wiring lead
• Insert the two brackets to the door
• Reinstall the bracket's Phillips screws
• Connect the courtesy light wiring harness
• Connect the speaker wiring lead
• Connect the door lock wiring harness
• Connect the window switch wiring harnesses
• Connect the latch cables to the door handle
• Lift the door panel into place
• Push in the door panel clips
• Insert the Phillips screw into the door handle
• Push on the trim piece inside the door handle
• Insert the Phillips screw into the door pull
• Push on the trim piece inside the door pull