2004-05 Dodge Ram 1500 Truck Wheel Bearing & Hub Assembly Pair TRQ BHA53725 - 1ASHS00765

These replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: 52070323AA, 52070323AB, 5083204AA, 52070323AH, 52070323AG, 52070321AA, 52070321AB
  • Studs already installed
  • Includes sensor
  • Direct replacements
  • Built to strict quality control standards

NOTE: 2004-07 Ram 1500 V8 5.7L Models with RWAL: The speed sensor is only on the LH (Driver Side) Wheel Bearing. Please verify there is a speed sensor on the LH (Driver Side) bearing before ordering.



  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel and tire (1:13)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (1:40)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your socket to remove the brackets.
  3. step : Remove brake disk (3:00)
    • Take care not to touch the rotor, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (3:16)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a pry bar to remove the axle.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:26)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 100 ft lbs.
    • Reinstall the ABS harness.
    • Replace the axle.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:40)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 120 ft lbs
    • Hub nut is 185 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Hub bearings
I Googled hub bearings.... Your ad popped up..I had shopped around beat everyone's price and warranty...the free freight and no tax sealed it...just installed them last Saturday...truck rides like new...very smooth and got my vote....looking forward to my next purchase from you
April 10, 2018
3 months ago
Nice Product and Price!
Ordering and Web-site details were right on! The pricing was equal or better than other suppliers; order processing and shipment was very timely and the product was great! The only issue I had was that packaging could have been better for this heavier item. The handlers tend to be rough on heavy packages so the boxes cam in all torn up.
February 4, 2018
5 months ago
As Advertised - So Far So Good
#1 They came as advertised
#2 They fit my 2004 Dodge Ram 1500 V8 5.7L Quad Cab 4x4
#3 They sound great (i.e. quiet)
#4 They have a lifetime warranty
#5 So far so good
November 13, 2017
8 months ago
So far no troubles with wheel bearings
Great website with all info you need on torque specs.
June 22, 2017
1 year ago
Perfect fit and easy to install.
The video for installation made this a very simple project for this backyard mechanic.
March 8, 2017
1 year ago
Saved $$
100% satisfied. My old bearings were shot & rusted on there. These were much cheaper than the local store and much much much cheaper buying & replacing myself versus the shop doing it. Plus 1A had a video on how to go about this which was also very helpful seeing beforehand that this is something I thought I would be able to tackle on my own during a weekend. Thanks 1A Auto!!!!!
February 27, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
What brand are these?
Mark H on Oct 17, 2017
BEST ANSWER: These are TRQ brand hub and bearing assemblies which are made to meet or exceed OE specifications and are backed with a limited lifetime warranty in the event of failure during intended use due to a manufacturing defect.

Vehicle Fit

  • 2004-2005 Dodge Ram 1500 Truck Front Wheel Bearing & Hub Assembly with Speed Sensor V8 5.7L & Rear Wheel ABS Brakes Pair TRQ

This part replaces:

  • TRQ BHA53725
Part #: 1ASHS00765

Brand #: BHA53725

How-to Video:

(13:39 min)