Specifications:

  • Brand New Suspension Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Remove the hub cap by loosening the lug nuts
    • Remove the lug nuts and tire
  2. step : Removing the Stabilizer Link (1:09)
    • Using locking pliers to clip onto the top of the stabilizer link
    • Then remove 14mm bolt from bottom of the stabilizer link
    • Remove the stabilizer link with a hammer or reciprocating saw
  3. step : Replacing the Stabilizer Link (2:07)
    • Put the stabilizer piece back into place
    • Use four washers, four grommets, and a tube
    • Use a jack stand to help push it through till it appears through the top
    • Tighten the 14mm bolt on the stabilizer link
  4. step : Replacing the Wheel (3:33)
    • Put the tire in place
    • Replace and tighten each lug nut
    • Torque each lug nut in a crossing pattern to 100 ft/lbs
    • Torque the center hub nut to 160 ft/lbs
    • Replace the hub cap and tighten the lug nut caps

Tools needed for replacement:

    General Tools

  • Sawzall
  • Jack Stands
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 22mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2014 Chevy Express 2500 Van 2 Wheel Drive 6 Piece Set Suspension Kit 8 Lug Wheels
  • 2003-2014 Chevy Express 3500 Van 2 Wheel Drive 6 Piece Set Suspension Kit Under 9900LB GVW
  • 2003-2014 GMC Savana 2500 Van 2 Wheel Drive 6 Piece Set Suspension Kit 8 Lug Wheels
  • 2003-2014 GMC Savana 3500 Van 2 Wheel Drive 6 Piece Set Suspension Kit Under 9900LB GVW

This part replaces:

  • Hollander 538-01480
  • OE # 15719007, 25840786
  • OE # 15049879
  • Hollander 538-01686
  • Moog K80631
  • Moog K6694
Part #: 1ASFK03186


How-to Video:

(04:39 min)