Replaces

2003-09 Lexus GX470 Toyota 4Runner Brake Kit Nakamoto 31326-DSZ, CD976 - 1APBS00876

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    Vented
    13.31" (338mm)
    6 Lug
  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Rotor Coating: Zinc Coated
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (2) Front Performance Brake Rotors
  • Product Line: Performance
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Pair
    • Includes both LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheel
  • 13.30" (338mm) diameter vented

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:09)
    • Use a flat blade screwdriver to pry off the center cap
    • Loosen the lug nuts
    • Lift the vehicle and remove the lug nuts
    • Remove the wheel
  2. step : Removing the Brake Pads (2:12)
    • Using a flat blade screwdriver pry the pistons back into the caliper. Do this on both sides
    • Push down on the clip tab and remove the clip
    • Push the pins out
    • Twist and pull the pins out with pliers
    • Pull the wire clip out at the top of the caliper
    • Pull the pads out
  3. step : Removing the Brake Caliper and Rotors (4:37)
    • Pull the clip above the brakes up
    • Loosen the bolts on the back of the caliper (Use breaker bar or pipe for leverage)
    • Hold the caliper and remove the bolts
    • Pull the caliper up and set it aside
    • Pull the rotor off
  4. step : Replacing the Brakes (6:59)
    • Slide the rotor into place
    • Put the caliper back into place
    • Insert the bolts on the back of the caliper. Torque to 100ft/lbs
    • Replace the clip at the top of the brake
    • Put the pads back into place
    • Put the wire clip back at the top of the brake pads
    • Put the upper pin back in to place
    • Put the lower pin back into place
    • Put the wire clip back into place on the side of the brakes
  5. step : Replacing the Wheel (10:51)
    • Put the wheel back into place
    • Replace the lug nuts
    • Lower the vehicle
    • Torque the lug nuts to 120ft/lbs
    • Replace the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
I was a 100percent satisfied with my order,the product was good and the service was excellent,the order arrived on time it was the right fit thank you guys so much".I will be back".
May 30, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2009Lexus GX470 Lexus GX470 Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
2003-2009Toyota 4Runner Toyota 4Runner Limited Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with 13.3" (338mm) Diameter Rotors Performance Nakamoto
2003-2009Toyota 4Runner Toyota 4Runner Sport Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto

This part replaces:

  • Nakamoto 31326-DSZ, CD976
Part #: 1APBS00876


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31326-DSZ, CD976

How-to Video:

(11:57 min)