Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Brand New Tie Rod Ends
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:41)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:13)
    • Turn the wheel by hand
    • Remove the 21mm nut from the outer tie rod
    • Thread the 21mm nut on a couple of turns
    • Hold the tie rod with an adjustable wrench
    • Loosen the tie rod adjusting nut with an adjustable wrench
    • Strike the steering knuckle with a hammer
    • Twist the 21mm nut off the tie rod
    • Measure the distance from the tie rod boot to the outer tie rod stud
    • Note that measurement
    • Twist off the outer tie rod.
  3. step : Installing the Tie Rod (2:11)
    • Twist on the outer tie rod
    • Measure the distance from the tie rod boot to the outer tie rod stud
    • This should be the same as the distance noted in Step 2
    • Move the adjusting nut as necessary
    • Push the tie rod into the wheel knuckle
    • Fasten the 21mm nut onto the tie rod
    • Tighten the 21mm nut to 111 foot-pounds of torque
    • Tighten the adjusting nut
    • Twist the grease fitting into the tie rod
    • Tighten the grease fitting with a 7mm socket and ratchet
    • Add grease to the grease fitting with a grease gun
  4. step : Reattaching the Wheel (3:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Measuring Tape
  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket
  • 10mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 21mm wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2008Toyota Corolla Toyota Corolla Inner & Outer Tie Rod 4 Piece Set
Part #: 1ASFK02997


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:25 min)