Replaces

2003-08 Toyota Corolla Strut & Spring Assembly - 1ASSP00706

Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

 

 

Should You Purchase This 4-Piece Stut & Spring Assembly Set For Your 2003-2008 Toyota Corolla?

Replacing the struts on your 2003-2008 Toyota Corolla doesn't have to be hard. A set of pre-assembled loaded struts, like this assembly, can save you a lot of trouble. In the past, if you wanted to replace your struts, you had to separate the springs from your old struts and attach them to the new ones. That required a special tool called a spring compressor and could be challenging (and even a little risky) for do-it-yourselfers. With these pre-loaded struts you can skip that obnoxious step.

The other major hassle with strut replacements is tracking down the matching parts. You want to replace struts in left-right pairs to keep your ride even. Better still, is replacing all four to get a smooth, fresh ride all around. When you buy a set of four, you don't have to worry about hunting down each individual strut. This assembly kit contains all four struts, built to fit and function just like the originals. This kit will fit 2003 - 2008 Toyota Corolla's, guaranteed.

With this aftermarket strut and spring assembly kit, you'll be ready to replace your own struts. Start by raising and supporting the vehicle. Then remove the wheel and any other parts that keep you from reaching the strut. Next, you can unbolt the strut from the wheel knuckle and the frame. Then bolt the new one on and put everything back together. Be sure to get a professional alignment after you work on your suspension.

Struts wear out over time, but they usually last about 60,000 miles, depending on your road conditions and driving style. If your struts need to be replaced, your ride might feel noticeably bumpy or your handling might feel loose and sloppy. The jounce and bounce test is a good way to test your struts. Push down on the hood to test your front struts or the trunk to test your rear struts. It should bounce ride back up and hold steady. If it bounces up and down a couple times, then it's time to replace your struts.

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.80/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
0
0
0
Awesome Service
I received my order on time and everything was good.
February 22, 2017
This product was very easy to install, and there Monroe quick struts.
July 23, 2017
Exactly what I asked for
They worked and got here in an appropriate time frame. Would definitely use the service again. They were also the cheapest part I found online! So best prices too
November 17, 2017
Great deal
Great Quality fit right fast shiping definitive buy more from 1aauto.com. Thanks
May 22, 2018
Quality Product!
Got front and rear struts very quickly! I’m 71 years old and was able to install all four on my Toyota Corolla in about 3 1/2 hours. Saved a ton of money!
May 29, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Can I adjust ride height with this product? I am wanting to lower my 07 Corolla
Jose R February 2, 2017
Hello Jose. This set of strut assemblies will not lower your Corolla, they are the same spec as original.
Tim K February 2, 2017
At this time we do not offer any lowering kits. A good source for this type of part is AutoAnything, who specifically deals with performance parts and upgrades.
Alex P February 3, 2017
Does this fit the 2003 corolla "S" model?
Carlos V April 27, 2017
Yes, these will fit the S model.
Alex P April 27, 2017
These shocks corolla 2006 are gas or oil?
Manuel V July 16, 2018
They use hydraulic fluid and are also gas charged!
Tim K July 16, 2018
Will this product fit "XRS" models?
Corey F July 19, 2018
These are listed to fit all 2003-2008 Toyota Corolla models.
Christa R July 19, 2018
Year Make Model Description
2003-2008Toyota Corolla Toyota Corolla Front & Rear Strut & Spring Assembly 4 Piece Set
Part #: 1ASSP00706


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout