Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement power window regulator with motor is just what you need to get your Honda Pilot in good shape again!

This power window regulator with motor features the following specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 72250-S9V-A02, 72250-S9V-A01, 72250S9VA02, 72250S9VA01
  • Power operation
  • Direct replacement
  • Includes power window motor already assembled to regulator
  • Built to strict quality control standards

This Honda Pilot power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:43)
    • Pry out the courtesy light
    • Remove the light bulb from the courtesy light
    • Pry off the sail panel
    • Pry up the switch panel with a flat blade screwdriver
    • Disconnect the wiring harnesses from the switch panel
    • Pry off trim piece inside the door handle
    • Remove the two Phillips head screw inside the door handle
    • Remove the Phillips head screw under the door pull
    • Remove the Phillips head screw inside the door pull
    • Pry out the top of the door handle out
    • Disconnect the door lock rod
    • Disconnect the door lock harness
    • Push the door handle into place
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the wiring harness from the door panel
    • Remove the three Phillips screws from the speaker
    • Disconnect the speaker wiring harness
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (4:27)
    • Disconnect the window motor lead
    • Push the window motor lead clip off
    • Push the yellow clip near the motor lead through the door
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the four 10mm bolts from the regulator
    • Remove the two 10mm bolts from the window track
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (6:29)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the two 10mm bolts into the window track
    • Push the window motor lead into the door
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window motor lead
  4. step : Installing the Door Panel (8:35)
    • Connect the speaker wiring lead
    • Tighten the three Phillips screws to the speaker
    • Connect the wiring harness to the door panel
    • Lift the door panel into place
    • Push in the door panel clips
    • Push in the sail panel
    • Connect the lock rod to the door handle
    • Connect the door lock harness
    • Push the door handle into place
    • Tighten the two Phillips head screw inside the door handle
    • Tighten the Phillips head screw inside the door pull
    • Tighten the Phillips head screw under the door pull
    • Connect the wiring harnesses to the switch panel
    • Push the switch panel into place
    • Connect the bulb to the courtesy light
    • Push the courtesy light into place

Tools needed for replacement:

    General Tools

  • Utility Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.80/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Overall is good
Some tips did not show in the video. But, overall experience was good.
July 2, 2017
Quick Free Delivery
The price was good, delivery was free and came in 3 days. It was the right part and video showing how to install it was great. I tried testing it before totally reassembling the door and it didnt work. I was sure I had all the necessary wires connected, so I called 1A and the lady said theyd send another one, no big deal. This was on a Saturday and the new one would ship Monday. I went back out. left the regulator installed and reassembled the door so we could drive it. The regulator worked. I didnt have the courtesy light plugged in on the previous test. Who would have thought I need the courtesy light plugged in to operate the window? I called back and cancelled the replacement. Really good service.
September 19, 2017
03 Honda Pilot window Regulator
Great product, everything lined up and bolted right in. The only thing I added was lightweight grease to the track only because the original had it. The installation video was extremely helpful. Note: be sure to hook up the driver side door courtesy light before final assembly (test) or the motor will not engage. Thanks, Mark M.
December 18, 2017
works like a charm
Had it installed today. So happy everything is working just fine.
July 30, 2018
Exactly as described
Part was perfect. Accompanying video allowed me to complete the project in a couple of hours.
October 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2008Honda Pilot Honda Pilot Front Power Window Regulator with Motor Driver Side
Part #: 1AWRG00744

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:31 min)