Replaces

2003-08 Honda Pilot Brake Kit Nakamoto MD914, 31275 - 1ABFS00022

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Semi-Metallic Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 45251 S0X 000, 45251S0X000, 45251 TA6 A00, 45251TA6A00
  • Fits 5 Stud Wheels
  • Vented
  • 11.8" (300mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:17)
    • Loosen the 19mm lug nuts and wheel lock key with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:19)
    • Remove the 12mm bolt from the brake hose bracket
    • Remove 12mm bolts from the brake caliper
    • Remove 17mm bolts from the brake caliper bracket
    • Pull the caliper and bracket aside and hang it with a bungee cord
  3. step : Removing the Brake Rotor (5:08)
    • Remove the screws from the rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    • Clean the hub with a wire brush
  4. step : Installing the New Brake Rotor (7:48)
    • Clean both sides of the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place
    • Start the bolts by hand
  5. step : Installing the Brake Caliper and Bracket (8:48)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper and bracket on
    • Tighten the caliper bolts
  6. step : Preparing the New Brake Pads (11:51)
    • Clean the brake pad clips with a wire brush
    • Put the brake pad clips into the caliper bracket
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  7. step : Installing the Brake Pads (13:57)
    • Place the brake pads on
    • Thread the caliper bolts in
    • Tighten the bracket bolt to the brake line
    • Tighten the caliper bracket bolts to 80 foot-pounds of torque
    • Tighten the brake caliper bolts to 27 foot-pounds
    • Torque the brake hose bolt to 16 foot-pounds
  8. step : Reattaching the Wheel (16:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (17:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Safety Glasses
  • Gloves
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 21mm wrench
  • 12mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Quality parts
The shipping was prompt the quality of the parts was excellent everything matched up perfectly did all four brakes little over two hours very pleased
January 29, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(17:44 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Safety Glasses
  • Gloves
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 21mm wrench
  • 12mm Wrench



This part replaces:

  • Nakamoto MD914, 31275

Vehicle Fit

  • 2003-2008 Honda Pilot Front Premium Posi Semi-Metallic Brake Kit Nakamoto
Part #: 1ABFS00022

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD914, 31275

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More