Replaces

2003-08 Honda Pilot Brake Kit Nakamoto CD865, CD914, 31275, 42510-S3V-A01 - 1ABFS01595

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade CERAMIC ENHANCED Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 45251-S0X-000, 42510-S3V-A01, 45251-TA6-A00, 45251S0X000, 42510S3VA01, 45251TA6A00
  • Fit 5 Stud Wheels
  • Direct replacements

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (4:33)
    • Remove bolts from the brake caliper
    • Pry the caliper from the pads
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
  3. step : Removing the Brake Rotor (5:25)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:30)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (8:19)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the bolts by hand
    • Torque the bolts
  6. step : Installing the New Brake Pads (9:18)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Apply grease to the back of the pads
    • Put the caliper on
    • Thread bolts by hand
    • Torque the caliper bolts
  7. step : Reattaching the Wheel (10:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Safety Glasses
  • Brake Parts Cleaner
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 11 answers
are the pads equal in quality to oem??
karl k on Aug 13, 2016
BEST ANSWER: They are on my wife's car, and she is tough on brakes. We have had zero issue with them, or anything else we have purchased from 1A auto. With 2 cars that are over 10 years old, we will definately continue to make purchases from them.
2004 honda pilot rotor and brakes, is it the manufacture type?
Joseph G on Jun 12, 2017
BEST ANSWER: If by type you mean does it fit, then yes. If you mean is the same, then no. I put a set of rotors and pads on my 2005 Pilot. The rear pads needed replacement in under 10K miles. I think this is a get what you pay for set. It was a good deal, but I spent more on pads this time and hope to get more life. Still, it is a lot of new braking for not a lot of money.

How-to Video:

(11:18 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Safety Glasses
  • Brake Parts Cleaner
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set



This part replaces:

  • Nakamoto CD865, CD914, 31275, 42510-S3V-A01

Vehicle Fit

  • 2003-2008 Honda Pilot Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS01595

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD865, CD914, 31275, 42510-S3V-A01

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More