2003-08 Dodge Ram 1500 Truck Complete Carpet 801-Black Auto Custom Carpets 16747-160-1085000000 - ZAICK05794

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Material:   Cutpile
  • Carpet Color:   801-Black
  • Manufacturing Process:   Molded

4 Full Size Doors. Covers Floor To Storage Box Under Rear Seat And Has Tails On Each Side.

Returns Note:

Please make sure the carpet fits the floorpan before making any cuts or alterations. Once cut, glued, or altered, the carpet is no longer returnable. Returns for stock colored carpets are accepted, but due to the carpets being custom made to order, they are subject to a 20% restocking fee. If there is a shipping problem or a manufacturer defect, a replacement carpet will be at no additional charge to the customer.

Shipping Note:

Carpets are custom made to order, and usually take 7-10 business days for you to receive them from the time the order has been placed. Since these are made to order, we unfortunately cannot expedite shipping.

Shipping outside of the continental 48 states will be an additional shipping charge to the customer.

What is Cutpile Carpet?

  • This carpet is similar to what is found in most domestic vehicles since ~1974.
  • In some cases its pile height is not as high as OEM.
  • Our nylon cut pile is constructed from 100% first quality Dupont yarn.
  • It is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard.
  • It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.

Color Note:

Online carpet color samples will give the general idea of the color of the carpet. However, all computer monitors are different, so if you are looking for an exact match to your vehicle, please contact us and we will mail physical color samples to you for comparison. Unfortunately we cannot mail physical color samples internationally at this time.

Carpet Description

  • Fit Guaranteed.
  • Highest quality material used.
  • Heat and pressure molded to an original floor pan to ensure exact fit.
  • Unless otherwise specified, most carpets come uncut, and buyer will need to cut holes as needed.
  • Heelpad is included for vehicles that original came with one attached to their carpet.

Installation Tips

  • Please make sure the carpet fits the floor pan before making any cuts or alterations. If you have any questions, it is best to contact us before altering the carpet, as it is not returnable if altered.
  • The first thing to do when preparing to install a carpet is to remove it from the box and let the carpet sit for about 24 hours, preferably in a warm area. This will allow the carpet to retake its molded shape.
  • When test fitting it into the vehicle you'll likely notice that there will be additional material on the sides. That's completely normal, you'll need to trim it to the desired width.
  • If a hole is needing to be cut for seats, console, etc, it is always best to start with a small slice as a test fit. Slices can be easily taped back together if they are in the wrong spot, holes cannot.
  • Never use the old carpet as a template for the new one. It is fine to reference it, but it should not be your guide for cutting.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

1 Year Warranty

This item is backed by a 1 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:50)
    • Disconnect the negative terminal with a 10mm wrench
    • Let the vehicle sit for 30 minutes to let the airbag modules power down
  2. step : Removing the Seats (1:00)
    • Undo the two 15mm bolts at the front of the seat brackets
    • Remove the two 15mm bolts at the back of the rail
    • Spray the underside of the vehicle where the bolts are with rust penetrant if needed
    • Remove the seat belt cover
    • Remove the T45 Torx bolt from the seatbelt
    • Pull the seat back and buckle in the seat with the rear seat belt
    • Disconnect the electrical connector under the driver's seat
    • Disconnect the red safety tab from the wiring harness
    • Remove the four 13mm nuts holding the seat together
    • Remove the center seat
    • Remove the driver and passenger seats
  3. step : Removing the Carpet (4:10)
    • Unscrew the thumb screw from the floor
    • Remove the jack from the vehicle
    • Remove the emergency roadside kid
    • Remove the T30 screws from the floor
    • Pull the kick panels up and out
    • Pull out the trim under the cup holder
    • Fold up the rear seat by pulling up on the bottom
    • Pull the snap out and fold the chair seat up
    • Remove the snap with a T20 Torx socket
    • Pull out the plastic clips holding the carpet underneath the seats
    • Remove the rear kick panel sills
    • Pull the carpet out from the sills
    • Pop out the rear cup holder
    • Pull the carpet out from the center console and driving pedals
    • Pull the wiring harness through the carpet
    • Bring the carpet out of the door
  4. step : Preparing the New Carpet (8:15)
    • Lay the new carpet over the old one
    • Pad the carpet to the shape of the old one and let it sit for a few hours
    • Trace an outline of the original carpet along the excess of the new carpet
  5. step : Installing the Carpet (10:11)
    • Line up the carpet with the interior shapes that protrude out
    • Press the carpet into the interior trim
    • Trim off any excess that covers the trim mounting points
    • For parts like the back seats, simply make a slit with a utility knife
    • Cut out a cross and create a small oval so the cup holder retains the carpet
    • Press the cup holder into place
    • If you have an occupant classification system, be very careful not the cut a wire
    • Carefully find the edge of the module
    • Cut around the module
    • Fit the carpet nice and tight around the edges of the rear kick panel
    • Snap the kick panel trim into place
    • Trim the carpet along where the front kick panel will place near the pedal
    • Make sure the carpet isn't interfering with any wires/e-brake, etc near the pedal cluster
    • Press the kick panel into place
    • Trim along the center console and passenger side
    • Press the passenger kick panel into place
    • Press the center panel trim into place
    • Feel around for the seat bracket holes and create a hole with a center punch
    • Punch out any alignment holes atop the bracket
    • Cut a flap along the back for the wiring harness
    • Pull the power-heated seat wiring harness through
    • Measure from the alignment pinhole from the top of the rail to the rear bracket hole
    • Locate and punch out the remaining three holes with the measurement
    • Punch holes for the rear seat clips
    • Punch a hole for the bungee mounting point
    • Tighten the T20 snap into place
    • Clip the rear seat carpet into place
    • Lower the rear seats into place
    • Clip the rear seat into place
    • Find the three emergency jack and tool kit holes
    • Punch a hole through
    • Screw the spare tire jack into place
    • Tighten the spare tire tools and T30 Torx screws
    • Vacuum out the carpet
  6. step : Installing the Seats (21:26)
    • Insert the seats into place
    • Leave them laid back
    • Tighten the 13mm bolts the center console onto the passenger seat
    • Clip the wiring harness into place
    • Connect the wiring harness
    • Lay the seats back down and align the bolt holes up
    • Tighten the 15mm bolts to the front of the seat
    • Tighten the 15mm bolts to the back of the seat
    • Torque the seat bolts to 30 foot-pounds
    • Insert the seatbelt tab into place
    • Tighten the T45 bolt into the seat belt
    • Torque the bolt to 29 foot-pounds
    • Press in the seatbelt cover
  7. step : Connecting the Battery (21:40)
    • Tighten the 10mm negative battery terminal

Tools needed for replacement:

    General Tools

  • Measuring Tape
  • Center Punch
  • Hammer
  • Utility Knife

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 18mm Socket
  • 15mm Socket
  • 13mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T45 Torx Socket
  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Quad Cab Molded Cutpile 801-Black Complete Carpet
Part #: ZAICK05794

Ships in 1-3 Business Days. Delivery times vary.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Auto Custom Carpet
Brand #: 16747-160-1085000000

How-to Video:

(24:42 min)