Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver) & RH (Passenger) Side FRONT
  • Fits 5 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (4:33)
    • Remove bolts from the brake caliper
    • Pry the caliper from the pads
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
  3. step : Removing the Brake Rotor (5:25)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:30)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (8:19)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the bolts by hand
    • Torque the bolts
  6. step : Installing the New Brake Pads (9:18)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Apply grease to the back of the pads
    • Put the caliper on
    • Thread bolts by hand
    • Torque the caliper bolts
  7. step : Reattaching the Wheel (10:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Safety Glasses
  • Brake Parts Cleaner
  • Gloves

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Great Parts
Ordering process was easy and the parts came in a timely manner. I had some questions and customer support was able to find the answers for me. Installation was pretty standard and so far I am happy with the parts that I bought.
February 16, 2017
Purchased
1 year ago
Fast, worked great
Fast shipping, and the parts are so for working flawless. Great site.
August 5, 2017
Purchased
9 months ago
Ordering parts for a car
I have ordered several times from this site. Everyone is friendly, courteous, and knowledgeable about the products. They are helpful in explaining the parts. The free standard shipping is awesome! I would recommend the guaranteed parts and this site.
April 20, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Where are these parts manufactured?
Jean C on Sep 20, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 2003-2008 Pontiac Vibe Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2008 Toyota Corolla Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2008 Toyota Matrix Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD923, 31270
Part #: 1ABFS00305



Nakamoto
Brand #: CD923, 31270

How-to Video:

(11:18 min)