Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Strut Assemblies
  • Kit Includes: (2) Rear Shock Absorbers
  • Quantity: 6 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Testing the Stabilizer Link (0:32)
    • Turn the wheel by hand or with the steering wheel
    • Try to move the stabilizer link by hand
    • A clanking or rattling noise indicates a faulty stabilizer link
  2. step : Removing the Wheel (0:54)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Stabilizer Link (1:22)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the top stabilizer link nut
    • Attach an 8mm wrench to the top stabilizer link stud
    • Turn the 18mm wrench to remove the nut
    • Attach an 18mm wrench to the lower stabilizer link nut
    • Attach an 8mm wrench to the lower stabilizer link stud
    • Turn the 18mm wrench to remove the nut
    • Pull out the stabilizer link
  4. step : Installing the New Stabilizer Link (4:03)
    • Put the new stabilizer link into place
    • Start the nuts onto the stabilizer link
    • Attach a 15mm wrench to the upper stabilizer link bolt
    • Tighten the nut with a 19mm socket and ratchet
    • Attach a 15mm wrench to the lwoer stabilizer link bolt
    • Tighten the nut with a 19mm wrench
    • Tighten the nuts to between 40 - 45 foot-pounds of torque
  5. step : Reattaching the Wheel (5:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Put on the hub cap, lining up the hole with the tire valve stem
    • Tighten the lug nut cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 18mm Wrench
  • 15mm Wrench
  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2007 Saturn Ion without RPO Code FE3 (Sport Suspension) Suspension Kit 6 Piece Set

This part replaces:

  • Monroe 5668
  • Monroe 72203
  • KYB 333461
  • KYB 333462
  • KYB 343308
  • Hollander 527-01489R
  • Hollander 527-01490L
  • OE # 20784686
  • OE # 22707166
  • OE # 22707167
  • Moog K80252
  • Monroe 5779
  • KYB 349043
  • Hollander 527-01497R
  • Hollander 527-01498L
Part #: 1ASFK05765

How-to Video:

(06:36 min)