Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications

  • LH (Driver Side)
  • Replaces dealer part numbers: 33151-SDA-A01, 33151SDAA01
  • Includes lens, and housing
  • Bulbs not included
  • Correct for both coupe and sedan models
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Front Bumper Cover (1:09)
    • Remove all the clips on the top and bottom
    • Use a screwdriver to pull up the push clips
    • Remove the two screws in the wheel wells
    • Remove the 4 10mm bolts
    • Finally, release the clips and remove the bumper cover, starting at the sides
  2. step : Removing the Headlight (4:20)
    • Remove the five 10mm bolts
    • Unplug/remove the bulbs
    • Use a screwdriver to unclip the wiring from the headlight
  3. DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb

  4. step : Installing the Headlight (6:15)
    • Put the bulbs back in and plug them in
    • Clip the wiring back to the headlight.
    • Tighten your five 10mm bolts back in to 5 or 10 ft lbs
  5. step : Replacing the Bumper Cover (7:37)
    • Replace clips, bolts and screws

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
A Good Fit
The part is almost identical to the originial Honda assembly and hope this assembly last another 13 years as the original.
April 24, 2017
Headlamp Review
You tube video sold me on this product. Was able to complete project based on this. Side turn signal would not work for me and I ran out of time so I just used old one which worked fine. Very clear light which now will cause me to replace other side because you can really tell a difference in clarity. Should buy push pins (grommets) as they are easily broken. I would recommend buying here for price and help with install.
April 10, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does the lifetime warranty cover the plastic lens fading and becoming obscure?
David D February 6, 2017
Yes, if the lens should fade or become yellow as some experience that is covered using our warranty. All we would ask is that you contact us with a brief description so we may issue a replacement.
Alex P February 6, 2017
Year Make Model Description
2003-2007Honda Accord Honda Accord Headlight Driver Side
Part #: 1ALHL00964


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:09 min)