Replaces

2003-07 Honda Accord Front Strut & Spring Assembly Pair TRQ SCA57009 - 1ASSP00163

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:27)
    • Partially raise the vehicle with the wheel still contacting the ground
    • Loosen the 19 mm lug nuts
    • Raise and support the vehicle on jack stands
    • Remove the lug nuts
    • Replace one lug nut loosely
    • Hammer the tire from the back side if the wheel is stuck
    • Remove the last lug nut and the wheel
  2. step : Removing the Strut (0:55)
    • Remove the 14 mm lower strut bolt
    • Remove the 17 mm nut from the 17 mm wishbone bolt and remove the bolt
    • Remove the wishbone from the bottom of the strut
    • Remove the three 14 mm and two 12 mm nuts from the top strut mount
    • Remove the strut from the top mount
    • Remove the upper control arm cotter pin
    • Remove the 17 mm upper control arm castle nut
    • Hit the upper knuckle to release the ball joint stud
    • Remove the 10 mm nut securing the ABS wire bracket to the upper control arm
    • Move the knuckle forward to remove the strut
  3. step : Installing the Strut (5:25)
    • Insert the strut top mounting studs into position
    • Install the three 14 mm top mount nuts and the two 12 mm nuts
    • Torque the three 14 mm nuts to 37 ft-lb
    • Torque the two 12 mm nuts to 16 ft-lb
    • Insert the lower strut into the wishbone
    • Install the 14 mm lower strut bolt
    • Torque the 14 mm lower strut bolt to 32 ft-lb
    • Align the wishbone with the lower control arm
    • Install the 17 mm bolt and tighten the 17 mm nut onto it
    • Torque the 17 mm wishbone bolt to 47 ft-lb
    • Insert the upper control arm ball joint into the knuckle
    • Install the ball joint castle nut
    • Torque the ball joint castle nut to 35 ft-lb
    • Continue tightening to align the castle nut with the cotter pin hole in the stud
    • Install the new cotter pin
    • Install the ABS wire bracket onto the upper control arm
    • Install the 10mm nut securing the bracket
  4. step : Installing the Wheel (11:53)
    • Slide the wheel onto the lug nuts
    • Replace the lug nuts and tighten them in a star pattern
    • Lower the vehicle with the wheel lightly touching the ground
    • Torque the lug nuts in a star pattern to 80 ft-lbs
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 17mm Wrench

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
I loved the parts thanks guys I will always shop with you all and Ima tell more people about yall cause not many knows bout yall
March 13, 2017
struts purchased from 1Aauto
Struts were as expected, customer service was top notch. Price was best I could find.
December 12, 2017
Will continue to purchase other parts from you all
March 17, 2018
Great product
This is a great product, it fits like it should the first time. This product will save you time ,money and effort .
March 25, 2018
Fast and easy
First of all. Parts came on time and even earlier than expected. They were easy to install and factory correct. I will be buying a set for the rear of the vehicle too. Highly recommend the parts and this site. Easy to work with.
May 29, 2018
The struts assembly
The struts i purchased were of excellent quality.Very easy to mount.Will definitely be ordering more parts and your videos are very Educational.I always watch your videos before i start any repairs.Thank you i always recommend your site.
November 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I HAVE A 2006 HONDA ACCORD EX 3.0 WILL THESE FIT?
STANford L February 11, 2016
Hello Yes these will work on your model application
Brian F February 11, 2016
Sure with no problem
Allen S February 12, 2016
Yes
K O May 29, 2018
Will these fit a 03 accord coupe?
Adan B October 13, 2016
Yes, this is nonspecific to the coupe or sedan model.
Derek C October 13, 2016
I just wanna be clear for 132.95$ i will get 2 front struts and they will be pre assembled?
Shiverme T September 2, 2017
Yes they are ready to mount
Allen S September 2, 2017
Yes, this is correct, two front struts already assembled which install directly in place of the old struts and springs. Vehicle installed on is a Honda Accord, 2003, EXL, V6
Mark C September 2, 2017
Yes. I bought these for my accord. They come assembled as shown in the pics, and the installation was pretty straight forward.
Jason G September 2, 2017
I ordered a set of front struts for a 2007 Accord they fit perfect an only took me about three hours to complete.
James E D September 3, 2017
you will be very pleased with these struts , its a good do it your self project that will save lots of money.
B R September 4, 2017
Will this fit a hybrid model?
Keng V December 11, 2018
These struts are not excluding any trims so these will fit the Hybrid models.
Corey M December 11, 2018
Year Make Model Description
2003-2007Honda Accord Honda Accord Front Strut & Spring Assembly Pair TRQ SCA57009
Part 1ASSP00163
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: SCA57009