Replaces

2003-07 Cadillac CTS Turn Signal Fog Driving Light Pair - 1ALFP00231

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

These replacement fog driving / Turn Signal lights are just what you need to get your vehicle in good looking form again!

Fog Light Specifications:

  • Includes Both LH (Drivers Side) & RH (Passengers Side)
  • Replaces dealer part numbers: 15930687, 15930688
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Lights do not include bulb or wiring

These fog driving / Turn Signal lights are great replacements and have good cost savings over the fog lights from the dealer.

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Bumper Cover (0:48)
    • Remove the plastic clips from the top of the bumper cover with a flat blade screwdriver or pliers
    • Leave two pins in the top of the bumper cover without their centers to hold it in place
    • Remove the eight pins from the bottom of the bumper cover
    • Remove the three pins from each inner fender
    • Separate the inner fender from the bumper cover
    • Remove the 10mm bolt from each inner fender
    • Remove the two 10mm nuts from each inner fender
    • Push each marker light out of the bumper cover
    • Disconnect each marker light wiring harness
    • Pull the bumper cover down
    • Remove the pins from the top of the bumper cover
    • Disconnect each fog light wiring harness
  2. step : Removing the Fog Light (4:57)
    • Remove the three 7mm bolts from the fog light
    • There will only be two 7mm bolts on CTS-V models
    • Pull the fog light out of the bumper cover
  3. step : Installing the New Fog Light (5:41)
    • Put the new fog light into place in the bumper cover
    • Insert the three 7mm bolts into the fog light
  4. step : Reinstalling the Bumper Cover (6:41)
    • Lift the bumper cover into place
    • Insert two pins into the top of the bumper cover to hold it in place
    • Connect each fog light wiring harness
    • Clean the edge of the bumper cover, if necessary
    • Pull the bumper cover into place
    • Fasten the two 10mm nuts inside each inner fender
    • Put each marker light into place
    • Connect each marker light wiring harness
    • Insert the 10mm bolt into the inner fender
    • Push each inner fender behind the bumper cover
    • Insert the remaining six pins into the top of the bumper cover
    • Insert the three pins into each inner fender
    • Push the splash shield behind the bumper cover
    • Insert the eight pins into the bottom of the bumper cover

Tools needed for replacement:

    General Tools

  • Flashlight

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 7mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2007Cadillac CTS Cadillac CTS Turn Signal Fog Driving Light Pair
Part #: 1ALFP00231


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:14 min)