This replacement mirror is just what you need to get your CTS in good working form again!

Mirror specifications:

  • Fits the LH (Driver Side)
  • Mirror options:
    • Power operation
    • Heated
    • Manual folding (RPO code DR5)
    • Memory
  • Comes black
    • can be installed as is or painted by buyer to match
  • Injection molded
  • Direct replacement
  • Built to strict quality control standards

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

This mirror is designed to replace the factory mirror and will install just as the original does. It makes a great replacement that has good cost savings over a dealer part.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:55)
    • Using a putty knife wrapped in paper towel pry out the bezel behind the door handle.
    • Disconnect the lock connector and pull the bezel free.
    • Using the putty knife pry off the connector on the lock at the top of the door panel.
    • Remove the panel behind the door pull handle.
    • Remove the two Phillips screws.
    • Starting at the top pull out on the door panel. Pull out the clips all the way around the door.
  2. step : Removing the Side Mirror (3:07)
    • Pry the clip out that's holding the wiring harness to the door.
    • Press the tabs and pull out the connectors from the mirror.
    • Remove the three 10mm nuts that secure the mirror in place.
    • Push the harness through and pull the mirror out and off.
  3. step : Replacing the Side Mirror (4:15)
    • Run the harnesses down through the door.
    • Line up the mirror and press it into place.
    • Replace the three 10mm nuts.
    • Re-clip the harness to the door.
    • Reconnect the mirror connectors to the door.
  4. step : Replacing the Door Panel (6:28)
    • Line up the door panel and push it into place starting with the top.
    • Replace the two Phillips screws.
    • Replace the trim panel behind the door pull handle.
    • Reconnect the lock switch and push the door handle bezel back into place.
    • Push the door lock down and push in the bottom tab to lock.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:28 min)

Tools List:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • Partslink GM1320357
  • Hollander 128-02690L
  • OE # 25765009

Vehicle Fit

  • 2003-2007 Cadillac CTS Power Heated Memory Manual-Folding Mirror Driver Side
Only 5 left in stock
Part #: 1AMRE01954

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More