Specifications:

  • Brand new
  • Mounts to radiator support
  • Built to strict quality control standards
  • Correct for USA Built Models only
    • USA models will have a VIN that starts with 1 or 4
    • Will not fit on models built in Japan (first VIN digit J)

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Hood Latch (1:43)
    • Remove the two 13mm bolts securing the hood latch.
    • Pry the hood latch cable up and out of the hood latch.
  2. step : Replacing the Hood Latch (2:42)
    • Pull back the spring and reconnect the hood latch cable.
    • Line up the hood latch and put it down into place.
    • Replace the two 13mm bolts.
  3. step : Adjusting Hood Height (3:45)
    • Loosen the 13mm bolts and slide the latch up or down to adjust the height of the center.
    • Turn the rubber knobs on either side of the engine to adjust the height of the sides.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 13mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2006Toyota Camry Toyota Camry SE (US Built Models) Hood Latch
2003-2006Toyota Camry Toyota Camry LE (US Built Models) Hood Latch

This part replaces:

  • Partslink TO1234102
  • OE # 53510AA070
Part #: 1ABHO00054


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:36 min)