Part Details

  • Quantity: Pair

This replacement Honda Civic 4 door tail light set is just what you need to get your vehicle in good looking form again!

Tail light specifications:

  • Driver and Passenger Side
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included
  • Correct for 4-door Sedan models only

This tail light pair makes a great replacement and has substantial cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Changing the Taillight Bulbs (0:56)
    • Turn the clip and pull it out.
    • Pull back the insulation.
    • Twist the sockets counterclockwise to remove.
    • Pull the bulb straight out.
    • Push a new one into place.
    • Twist the socket back into place.
  2. step : Removing the Rear Bumper Cover (1:46)
    • Remove the 10mm bolts and Phillips screws from the back of the wheel wells.
    • Pry of the covers at the top of the rear bumper and remove the 10mm bolts behind them.
    • Pry out the clips under the bumper.
    • Pull the bumper out on each side.
  3. step : Removing the Taillight Assembly (3:27)
    • Remove the two 8mm bolts under the taillight.
    • Remove the three 8mm bolts from the back of the taillight.
    • Twist out the sockets.
    • Remove the Phillips screw and remove the bracket.
  4. step : Replacing the Taillight Assembly (4:39)
    • Remove the Phillips screw from the new taillight assembly.
    • Attach the bracket to the new taillight and replace the Phillips screw.
    • Line up the taillight and push it into place.
    • Replace the 8mm bolts.
    • Twist the sockets into place.
    • Replace the insulation.
  5. step : Replacing the Rear Bumper Cover (5:29)
    • Line up the bumper cover and push it into place.
    • Replace the 10mm bolts at the top of the bumper cover. Replace the bolt covers.
    • Replace the clips under the bumper cover.
    • Replace the Phillips screws and 10mm bolts in the wheel wells.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2005Honda Civic Honda Civic 4 Door Sedan Tail Light Pair

This part replaces:

  • Partslink HO2801153, HO2800153
  • OE # 33501S5DA51
  • OE # 33551S5BA01
Part #: 1ALTP00285


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:19 min)