This replacement power window regulator with motor is just what you need to get your Honda Odyssey in good shape again!

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Includes the power window motor
  • Replaces dealer part numbers: 72250-S0X-A52, 72250S0XA52
  • Power operation
  • Direct replacement
  • Built to strict quality control standards

This Honda Odyssey power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Installation:

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:44)
    • Pry up the screw cover inside the door pull with a flat blade screwdriver
    • Pry up the screw cover inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw from the door pull
    • Remove the Phillips head screw from the door handle
    • Pry the window switch panel off with a flat blade screwdriver
    • Disconnect the wiring harnesses from the window switch
    • Pull the door handle forward and off
    • Unclip the latch rod from the door handle
    • Disconnect the door lock wiring harness
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Pry the door panel off by hand
    • Lift the door panel up and off
    • Disconnect the speaker wiring harness
  2. step : Removing the Window Regulator (2:53)
    • Remove the Phillips screws from the window control box
    • Remove the two Phillips screws from the control box bracket
    • Pry off the rubber plugs with a flat blade screwdriver
    • Peel back the watershield
    • Raise the window by hand to access the bolts
    • Remove the two 10mm bolts that hold the window to the regulator
    • Raise the window
    • Hold the window in place with painter's tape
    • Disconnect the window motor wiring harnesses
    • Remove the Phillips screw from the window motor plate
    • Remove the wiring connectors from the plate with pliers
    • Remove the seven 10mm bolts from the window regulator
    • Pull the window motor up and out
    • Pull the regulator out of the door
  3. step : Installing the New Window Regulator (5:36)
    • Remove the bolts from the old regulator
    • Install the bolts into the new regulator
    • Put the new regulator into place
    • Hang the regulator in place by the top bolt
    • Hang the window motor in place by its bolts
    • Pull the window motor wiring harness through the door
    • Tighten the seven 10mm bolts into the regulator
    • Clip the wiring connectors to the motor plate
    • Connect the wiring harnesses
    • Put the plate into place
    • Insert the Phillips screw into the plate
    • Remove the painter's tape from the window
    • Slide the window down onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window switch wiring harness
    • Turn on the ignition
    • Test the window with the switch
    • Turn off the ignition
    • Disconnect the window switch wiring harness
    • Put the watershield into place
    • Insert the rubber plugs
    • Put the window control box bracket into place
    • Insert the two Phillips screws into the control box bracket
    • Put the control box into place
    • Insert the two Phillips screws into the control box
  4. step : Reinstalling the Door Panel (8:01)
    • Connect the speaker wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Push the mirror base trim piece into place
    • Connect the door lock wiring harness
    • Clip the latch rod to the door handle
    • Push the door handle into place
    • Connect the window switch wiring harnesses
    • Push the window switch panel into place
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw into the door pull
    • Put on the screw cover in the door handle
    • Put on the screw cover in the door pull

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Window regulator
Came on time and fit perfectly. Video guide was very helpful
July 29, 2017
Purchased
1 year ago
Love it. Ease of ordering, delivery and performance were great.
June 17, 2017
Purchased
1 year ago
The product came as ordered in working order unfortunatlely during the installation process come to find out my original regulator was not the problem so i dont need part! but will need switch smh fml
May 3, 2011
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2004Honda Odyssey Honda Odyssey Front Power Window Regulator with Motor Driver Side

This part replaces:

  • OE # 72250S0XA52
  • Hollander 125-58990L
  • Dorman 741-009
  • TYC 660124
Part #: 1AWRG01242


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:50 min)