Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 52088662AB
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:05)
    • Hold the upper sway bar link stud with a 15mm wrench
    • Remove the upper nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Remove the lower nut from the sway bar link with an 18mm socket and ratchet
    • Tap the bolt out with a hammer
    • Use a hammer and pick if necessary
    • Pull off the sway bar link
  3. step : Installing the New Sway Bar Link (1:59)
    • Push the new sway bar link into place
    • Thread the top 15mm bolt into place
    • Start the top 18mm nut by hand
    • Thread the bottom 15mm bolt into place
    • Start the bottom 18mm nut by hand
    • Hold the upper sway bar link stud with a 15mm wrench
    • Fasten the upper nut onto the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 15mm socket and ratchet
    • Fasten the lower nut onto the sway bar link with an 18mm socket and ratchet
    • Tighten the 18mm nuts to 60 foot-pounds of torque
  4. step : Reattaching the Wheel (3:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Pick
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2007Jeep Liberty Jeep Liberty Front Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00237


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:59 min)