Replaces

2002-07 Jeep Liberty Driveshaft FRONT (A1 Cardone REMAN) A1 Cardone 65-9324 - CADSH00008

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

A1 CARDONE DRIVESHAFT (65-9324) FRONT

This FRONT Driveshaft is a newly remanufactured part that has been rebuilt to very strict quality control standards. It is just what you need to get your vehicle in good working order!

Specifications:

  • Replaces FRONT Driveshaft
  • Rebuilt to strict quality control standards
  • No core charge
  • Construction type:
    • Transfer Case Side: CV Joint Type
    • Front Axle Side: CV Joint Type
    • Weld to Weld Length: 16.5 "
      • Measure Tube Length from Weld to Weld on each end of collapsed shaft.

Features & Benefits of this rebuilt driveshaft:

  • 100% Dynamically Balanced. - Reduces vibration and increases joint life. Dynamic balance is better than static because the unit is balanced at the speeds it will see on the vehicle.
  • 100% New Universal Joints Installed. - Ensures proper fit & function for optimal performance and durability
  • All slip yokes are lubricated to O.E. specifications to prevent premature wear.
  • High speed balancing at 3200 RPMs ensure vibration-free operation.
  • All shafts are measured to guarantee proper fit.

Item Condition: Remanufactured

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Driveshaft (0:32)
    • Have an assistant hold the driveshaft in place or brace it yourself
    • Remove the 8mm bolts at the front of the driveshaft
    • Separate the front of the driveshaft from the transmission with a flat blade screwdriver and a hammer
    • Remove the 8mm bolts at the rear of the driveshaft
    • Separate the rear of the driveshaft from the differential with a flat blade screwdriver and a hammer
    • Pull the driveshaft down and out starting from the rear
  2. step : Installing the Driveshaft (2:05)
    • Lift the new driveshaft into place starting with the rear
    • Have an assistant hold the wheels in place
    • Insert the 8mm bolts at the front of the driveshaft
    • Insert the 8mm bolts at the rear of the driveshaft
    • Tighten the 8mm bolts to 12-14 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Assistant
  • Hammer

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2007Jeep Liberty Jeep Liberty Driveshaft FRONT (A1 Cardone REMAN) V6 3.7L and 16-1/2 Inch (weld to weld) Prop Shaft Length A1 Cardone 65-9324
Only 1 left in stock
Part #: CADSH00008


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

A1 CARDONE
Brand #: 65-9324

How-to Video:

(03:42 min)