Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. In this video, we're going to show you rear view mirror replacement on this 2005 Camry same as all this era Camry. The only tools you'll need are a flat blade screwdriver and a 10mm socket and ratchet. This is a USA built car so if your car was built in Japan, it could be a little bit different. I believe the leads may go down inside the door panel.
This is the US built model, so you just pull this off and then there's three 10mm nuts here. You have a lead right here. To unplug this lead, use a small screwdriver, there's a tab right under here. Push up. Pull out. Just removing this nut. Here's your mirror off.
Here's the original mirror and the new mirror from 1A Auto. You can see the new mirror is all the same, it just has these protectors for shipping here. 1A Auto mirrors come in black, you can mount it as is, if you would like to paint it to match. I suggest going to an automotive paint or an automotive parts store that has a good paint department, they can usually match your paint based on your paint code which they can help you find. They can give you some paint in an air charged can and you can paint it yourself.
Now for this vehicle, obviously my mirror is in good shape so I'm just going to reinstall it. For reinstallation, it's just a reverse of the procedure. Put the new mirror in. Plug our lead in. Put our nuts on it. Again this is an American built or USA built car. I believe a Japan built, you might have to remove your door panel and just see our video for ... Just go to Camry door panel removal and you'll see how to do that. I'll speed it up here briefly as put those last two nuts on and then tighten them up with a wrench. You want them nice and firm, you don't have to have them extremely tight because the mirror is plastic and you can break it if you over tighten them. I'm putting this panel back on, just pry this little clip if it didn't come off with your trim panel. Put it back on the trim panel and snap it into place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for on the Internet and in person.
