100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:05)
    • Loosen the lug nuts with a 21 mm socket and ratchet or lug wrench.
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
    • Set aside.
  2. step : Remove the calipers. (2:10)
    • Remove the 14 mm caliper bolts and the 17 mm caliper bracket bolts.
    • Pull off the calipers and brackets.
    • Remove the rotor.
    • Check the caliper pistons to make sure they are moving in and out freely.
    • Add bearing grease to lubricate them if necessary.
  3. step : Install the new brake pads and rotors (7:04)
    • Clean the new rotor with brake cleaner
    • Be careful not to touch the brake disk.
    • Install new brake pads.
    • Apply a little white grease to the corners to make installation and replacement easier.
    • Use a c clamp to compress the caliper to install it easier.
  4. step : Put the wheel back on (10:40)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the car and use a star pattern to torque the lug nuts.
    • Consult the owner’s manual to torque the lug nuts to the correct ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Bearing Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Toyota Camry LE Front & Rear Brake Rotor

This part replaces:

  • Reference Number 31050
  • Hollander 533-58639
  • Hollander 530-58456, 530-58498
  • OE # 4243106050, 4243106051
  • OE # 43512-08021
  • Reference Number 31322
Part #: 1ABFS03195



How-to Video:

(11:33 min)