Part Details

  • Regulator Option: with Motor
  • Operation: Power

Specifications:

  • Fits LH (Driver Side) Rear
  • Power operation
  • Includes the power window motor
  • 100% tested prior to leaving the factory

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:09)
    • Remove the cap from the pull handle
    • Remove the Phillips screw from the switch panel
    • Pry the switch panel trim piece with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Remove the caps from the pull handle
    • Remove the Phillips screws from the pull handle and door handle
    • Lift the door panel up and off
    • Pull the cables out of the door handle
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (2:54)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Disconnect the window motor lead wiring harness
    • Remove the four 10mm bolts from the regulator
    • Remove the 10mm bolt from the window track
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (4:36)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the 10mm bolts into the window track
    • Reconnect the window motor wiring harness
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. step : Reinstalling the Door Panel (5:46)
    • Put the water shield into place
    • Reconnect the cables back into the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert and tighten the two Phillips screws at the pull handle
    • Insert and tighten the two Phillips screws at the door handle
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Replace the Phillips screw on the switch panel

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2006Nissan Altima Nissan Altima Rear Power Window Regulator with Motor Driver Side

This part replaces:

  • Hollander 617-58747L
  • Hollander 617-58649
  • Hollander 135-58536L
  • Dorman 748-978
  • OE # 827218J000
  • OE # 827313Z005
Part #: 1AWRG01813


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:59 min)