Replaces

2002-06 Nissan Altima Wheel Bearing & Hub Kit Front Pair - 1ASHS00362

Part Details

  • Bearing Type: Ball Bearing
  • Quantity: Pair
  • Front or Rear Location: Front

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver's) & RH (Passenger's Side) FRONT
  • Direct replacement
  • Replaces dealer part numbers: 40202-4U010, 402024U010, 40210-2Y000, 402102Y000
  • Fits 5 Lug Wheel
  • Wheel studs already installed
  • Fits inside wheel bearing
  • Built to strict quality control standards
  • Correct for models with L4 2.5L engine
    • Does not fit V6 3.5L
  • Includes Wheel bearing
    • Buyer will need to have hub and bearing pressed together

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto hub bearings are all tested prior to shipping.

Fit guaranteed

  • This hub will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.
    1. Jack the vehicle up and support with proper jack stands.
    2. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.
    3. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way.
    4. Unplug ABS sensor (if applicable)
    5. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

    Reverse order to install.
    We were able to do a removal and replace on a GM car in about 45 minutes.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect size they fit like a glove with smooth installation!!
July 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Is it two wheel hud and two bearings? Or just one hud and one bearing?
flakko116 on Aug 3, 2018
BEST ANSWER: This item comes with both driver and passenger front hubs and bearings. Make sure when you disassemble and press the old one out or new one in, that you remove both retaining rings. I didn’t and now need a new knuckle assembly, but you live and learn

Vehicle Fit

Year Make Model Description
2002-2006Nissan Altima Nissan Altima L4 2.5L Front Wheel Bearing & Hub Kit Pair

This part replaces:

  • Dorman 930-701
  • Hollander 538-58905
  • OE # 40210-2Y000
  • OE # 40202-4U010
Part #: 1ASHS00362


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout