These performance Tail lights are brand new in the box and ready to install!


  • Performance Carbon Fiber Tail lights
  • Comes as a PAIR
    • Fits both the LH (Driver Side) and RH (Passenger Side)
  • Includes lenses & housings
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacements

These Tail lights are built to strict quality control standards and make great looking replacements over stock Tail lights.


Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Tail Light (0:41)
    • Open the trunk
    • Remove the plastic clip from the trunk liner with a Phillips head screwdriver
    • Pull back the trunk liner
    • Pull off the tail light wiring harness
    • Pull off the tail light wiring clip
    • Remove the two 8mm nuts from the tail light studs
    • Disconnect the tail light wiring harness with a flat blade screwdriver
    • Pull the tail light back and out
    • Pull the tail light wiring harness through its cavity
  2. step : Servicing the Tail Light Bulbs (1:30)
    • Twist the bulb sockets counterclockwise out the light
    • Pull the bulbs off of the sockets
    • Push on the new bulbs
    • Twist the bulbs clockwise into the light
  3. step : Installing the New Tail Light (1:44)
    • Feed the tail light wiring harness through its cavity
    • Push the new tail light into place
    • Fasten the two 8mm nuts onto the tail light
    • Connect the tail light wiring harness
    • Push on the wiring harness clip
    • Push the wiring harness onto the stud
    • Push the trunk liner into place
    • Insert the plastic clip into the trunk liner

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima Carbon Fiber Look Performance Tail Light Pair

This part replaces:

  • Partslink NI2811122
  • Hollander 166-59310R,1L, 59810R/L, 812R,
  • DEPO 315-1938P-AS3
Only 1 left in stock
Part #: 1ALTZ00071

How-to Video:

(03:54 min)