Specifications:

  • Brand New Suspension Kit
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 4 Piece Set
  • Kit Includes: (2) Front Strut & Spring Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:58)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the sway bar links (1:17)
    • Hit the bolts with penetrating oil.
    • Use a 17 mm socket and 19 mm wrench to remove the bolt on each end of the sway bar link.
  3. step : install the new sway bar link (2:41)
    • Feed your sway bar link into place.
    • Thread the nuts and bushings.
    • Tighten up both bolts with your 17 mm socket and 19 mm wrench.
  4. step : put your wheel back on (3:15)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima V6 3.5L 4 Piece Set Suspension Kit

This part replaces:

  • OE # 546688J000
  • OE # 546188J000
  • Monroe 171427
  • Monroe 171426
  • KYB SR4164
  • KYB SR4163
  • Moog K90352
  • Moog K90353
Part #: 1ASFK05054

How-to Video:

(03:52 min)