Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (1) Front Strut & Spring Assembly
  • Kit Includes: (2) Rear Shock Absorbers

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Strut (0:39)
    • Raise and secure the vehicle
    • Apply penetrating oil to the two 12mm bolts
    • Remove the two 12mm nuts from the top of the strut
    • Remove the 18mm bolt from the bottom of the strut
    • Pry the strut up and off its mounting with a pry bar
    • Pull out the strut and the rubber cap
  2. step : Preparing the New Strut (2:14)
    • Put the old strut in a vise
    • Remove the 14mm nut from the top of the strut
    • Pull off the outer part of the strut
    • Slide the outer part of the strut onto the new strut
    • Put the new strut into a vise
    • Tighten the 14mm nut onto the new strut
  3. step : Installing the New Strut (3:24)
    • Put the rubber cap on top of the new strut
    • Slide the new strut into place
    • Line up the new strut onto its studs
    • Insert the 12mm nuts onto the strut
    • Push the bottom of the strut into place with a hammer and a pry bar
    • Insert the 18mm bolt into the bottom of the strut

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima V6 3.5L Suspension Kit 8 Piece Set

This part replaces:

  • Monroe 171427
  • Monroe 171426
  • Monroe 5990
  • KYB 344395
  • KYB SR4164
  • KYB SR4163
  • Moog K90352
  • Moog K90353
  • Moog K90684
  • OE # 546688J000
  • OE # 546188J000
  • OE # 562618J000
Part #: 1ASFK01960

How-to Video:

(04:55 min)