Replaces

2002-06 Nissan Altima Steering & Suspension Kit - 1ASFK02516

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 8 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (0:58)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the sway bar links (1:17)
    • Hit the bolts with penetrating oil.
    • Use a 17 mm socket and 19 mm wrench to remove the bolt on each end of the sway bar link.
  3. step : install the new sway bar link (2:41)
    • Feed your sway bar link into place.
    • Thread the nuts and bushings.
    • Tighten up both bolts with your 17 mm socket and 19 mm wrench.
  4. step : put your wheel back on (3:15)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Quality is A1
Parts for perfectly and I haven't had any issues since installing. Thanks!!
May 22, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Does this kit fit the 2.5 L ?
Jon69 on Mar 10, 2016
BEST ANSWER: This part is specific to vehicles listed. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.
Will this fit my 2006 Nissan Altima 2.5 L?
Christina T on May 11, 2017
BEST ANSWER: This will be specific to the 3.5L Altima.

Vehicle Fit

  • 2002-2006 Nissan Altima 8 Piece Set Steering & Suspension Kit V6 3.5L

This part replaces:

  • OE # 485200M025, 485200M085
  • OE # 546688J000
  • OE # 546188J000
  • OE # 485217Y000, 485218J000
  • Moog K90352
  • Moog K90353
  • Moog ES3438
  • Moog EV427
  • Monroe 171427
  • Monroe 171426
  • KYB SR4164
  • KYB SR4163
Part #: 1ASFK02516

How-to Video:

(03:52 min)