Replaces

2002-06 Nissan Altima Complete Strut Assembly & Shock Absorber Kit - 1ASSP00660

Part Details

  • Quantity: 4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Strut (0:39)
    • Raise and secure the vehicle
    • Apply penetrating oil to the two 12mm bolts
    • Remove the two 12mm nuts from the top of the strut
    • Remove the 18mm bolt from the bottom of the strut
    • Pry the strut up and off its mounting with a pry bar
    • Pull out the strut and the rubber cap
  2. step : Preparing the New Strut (2:14)
    • Put the old strut in a vise
    • Remove the 14mm nut from the top of the strut
    • Pull off the outer part of the strut
    • Slide the outer part of the strut onto the new strut
    • Put the new strut into a vise
    • Tighten the 14mm nut onto the new strut
  3. step : Installing the New Strut (3:24)
    • Put the rubber cap on top of the new strut
    • Slide the new strut into place
    • Line up the new strut onto its studs
    • Insert the 12mm nuts onto the strut
    • Push the bottom of the strut into place with a hammer and a pry bar
    • Insert the 18mm bolt into the bottom of the strut

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 14mm Wrench

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
2
0
0
0
Easy install
Gald I went with the complet assembled strut, and not have to mess around with spring clams. It was a quick and easy installed after looking at your video clips.
February 24, 2018
Purchased
7 months ago
Everything was as expected. The instructions were good and it all worked out fine.
Thanks
February 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
Will this fit the 2.5? I can't see the 2.5 4piece set on your site.
Dennis A on Nov 21, 2016

Vehicle Fit

Year Make Model Description
2002-2006Nissan Altima Nissan Altima Front & Rear Complete Strut Assembly & Shock Absorber Kit 4 Piece Set V6 3.5L

This part replaces:

  • Monroe 171427
  • Monroe 171426
  • Monroe 5990
  • KYB 344395
  • KYB SR4164
  • KYB SR4163
Part #: 1ASSP00660


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:55 min)