Replaces

2002-06 Nissan Altima Shock Absorber Rear Pair TRQ SBA60105 - 1ASSP00071

Our direct fit gas-charged shock absorbers help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Front or Rear Location: Rear
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Strut (0:39)
    • Raise and secure the vehicle
    • Apply penetrating oil to the two 12mm bolts
    • Remove the two 12mm nuts from the top of the strut
    • Remove the 18mm bolt from the bottom of the strut
    • Pry the strut up and off its mounting with a pry bar
    • Pull out the strut and the rubber cap
  2. step : Preparing the New Strut (2:14)
    • Put the old strut in a vise
    • Remove the 14mm nut from the top of the strut
    • Pull off the outer part of the strut
    • Slide the outer part of the strut onto the new strut
    • Put the new strut into a vise
    • Tighten the 14mm nut onto the new strut
  3. step : Installing the New Strut (3:24)
    • Put the rubber cap on top of the new strut
    • Slide the new strut into place
    • Line up the new strut onto its studs
    • Insert the 12mm nuts onto the strut
    • Push the bottom of the strut into place with a hammer and a pry bar
    • Insert the 18mm bolt into the bottom of the strut

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Nissan Altima Rear Shock Absorber Pair TRQ SBA60105

This part replaces:

  • Monroe 5990
  • KYB 344395
  • TRQ SBA60105
Part #: 1ASSP00071

TRQ
Brand #: SBA60105

How-to Video:

(04:55 min)