2002-06 Nissan Altima Radiator Cooling Fan Assembly - 1ARFA00023

Specifications:

• New, not rebuilt, electric motor
• Geometrically designed plastic blades for optimal circulation and uniform balance
• Plastic shroud designed to ensure structural integrity and endurance for maximum performance
• Performance tested
• Replaces original assemblies that are melted or worn out
• Comes with proper plug for trouble free installation

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Radiator Fan (0:40)

• Remove the plastic panel by prying up the clips
• Clamp the hose clamp with pliers and remove the radiator hose
• Push the tab on the top with a flat blade screwdriver and pull up on the harness
• Pry out the clips from the radiator fan's harness
• Remove the radiator fan's two 10mm bolts
• Move the fan back and forth, and unclip a hose further down
• Pull the fan up and out

Try not to pinch any hoses when replacing the fan

step : Installing the Radiator Fan (2:58)

• Place the radiator fan into the two slots
• Replace the vacuum hose back into the bottom
• Replace the 10mm bolts
• Replace the radiator hose
• Replace the clips from the radiator fan's harness
• Replace the plastic panel and four clips