2002-06 Honda CR-V Window Regulator - 1AWRG01203

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This replacement power window regulator with motor is just what you need to get your Honda CR-V in good shape again!


  • RH (Passenger Side) REAR DOOR
  • Includes the power window motor
  • Replaces dealer part numbers: 72710-S9A-013, 72710S9A013
  • Power operation
  • Direct replacement
  • Built to strict quality control standards

This Honda CR-V power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.


  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.


  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.


  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:41)
    • Remove the trim piece behind the door handle
    • Remove the two Phillips screws behind the door handle
    • Remove the two Phillips screws inside the door pull
    • Pry up the switch panel with a flat blade screwdriver
    • Disconnect the window wiring harness
    • Remover the trim piece in the top corner
    • Remove the door handle
    • Disconnect the latch cables behind the door handle
    • Push in the center and remove the retaining clip in the front corner of the door panel
    • Pry out the door panel with a putty knife or a door panel removal tool
    • Disconnect the wiring harness from the door panel
    • Remove any remaining clops with a pair of needle nose pliers
    • Carefully remove the water shield
  2. step : Removing the Window Regulator (3:42)
    • Loosen the three 10mm bolts from the window motor
    • Remove the two 10mm bolts that hold the window to the regulator
    • Loosen one of the 10mm bolts from the window regulator and remove the other two
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Disconnect the window motor lead
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (5:58)
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Tighten the three 10m bolts for the window motor
    • Insert the two 10mm bolts into the regulator
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Turn the vehicle on
    • Connect the switch to the switch panel
    • Disconnect the wiring harness
  4. step : Installing the Door Panel (8:45)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the two Phillips screws below the door pull
    • Connect the lock rod to the door handle
    • Push the door handle into place
    • Insert the two Phillips screws to the door handle
    • Connect the wiring harness to the switch panel
    • Push in the switch panel
    • Push in the trim piece behind the door handle
    • Place the retaining clip in the top corner
    • Replace the triangle trim piece in the top corner

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this part is for rear left window or rear right window...?
Bryan L September 24, 2018
This is for the passenger side rear.
Emma F September 24, 2018
This is for the passenger side, or the right side. It is only for that side in the rear.
Emma F September 25, 2018
Year Make Model Description
2002-2006Honda CR-V Honda CR-V Rear Power Window Regulator with Motor Passenger Side
Part #: 1AWRG01203

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(11:31 min)