Part Details

  • Mirror Operation: Power
  • Mirror Color / Finish: Textured Black

Specifications:

  • LH (Driver side)
  • Power
  • Textured Black Finish
  • Direct replacement
  • Non Heated
  • Built to strict quality control standards

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:36)
    • Remove the clip under the triangular panel by pushing in the center and prying the clip out.
    • Remove the panel behind the door handle.
    • Pry up the switch panel.
    • Disconnect the harnesses from the switch panel.
    • Remove the triangular trim panel.
    • Remove the Phillips screws behind the door handle and under the armrest.
    • Pull the door handle out.
    • Disconnect the harness and door handle cable.
    • Pull out along the door panel to release the clips.
    • Lift the door panel up and off.
    • Disconnect the harnesses on the backside of the door panel.
  2. step : Removing the Side Mirror (4:17)
    • Pull down the water shield until you can see the mirror harness.
    • Disconnect the mirror harness.
    • Pry the harness from the door.
    • Remove the three 8mm nuts.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (5:44)
    • Feed the harness down through the door.
    • Replace the three 8mm nuts.
    • Clip the harness back to the door.
    • Reconnect the harness.
    • Replace the water shield.
  4. step : Replacing the Door Panel (7:25)
    • Reconnect the harnesses to the door panel. Run the other harnesses through the door.
    • Line up the door panel and push it down and back into place. Hit around the edges to engage the clips.
    • Replace the Phillips screws under the armrest.
    • Reconnect the harnesses to the switch panel and push it down into place.
    • Reconnect the power lock switch and reconnect the door handle cable.
    • Push the door handle back into place.
    • Replace the two Phillips screws behind the door handle. Replace the trapdoor.
    • Push the triangular panel back into place.
    • Replace the clip.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Easy to Install, Vibrates on Freeway
Mirror came quick and build quality felt very sturdy. Motors work just fine. Video instructions easy to follow and finished installation in about 30 minutes.

The mirror vibrates slightly when driving at higher speeds. This is a minor annoyance and doesn't affect the function of the mirror.
March 19, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2006Honda CR-V Honda CR-V Power Textured Black Mirror Driver Side

This part replaces:

  • Hollander 128-53151BL
  • Partslink HO1320215
  • OE # 76250S9AA01
Part #: 1AMRE01920


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:31 min)