Replaces

2002-05 Dodge Wiper Motor, Linkage, & Jumper Harness Mopar 5127710AA, 68043386AC - MPERK00002

MOPAR WIPER MOTOR, LINKAGE, & HARNESS: 5127710AA & 68043386AC

This motor, linkage, & harness is a genuine Mopar replacement part! It is the very same piece you would receive if purchased from your local dealer!

Specifications:

  • Brand New Mopar Wiper Motor, Linkage, & Harness
  • Harness converts plug from an Oval Connector to a Square Connector
  • Original equipment replacement
  • Replaces dealer part numbers: 5127710AA, 68043386AC
  • Built to strict quality control standards

Now you can have a genuine Mopar wiper motor, linkage, & harness shipped right to your door!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wiper Arms (0:33)
    • Lift the wiper arm up
    • Pull out the tab on the end of the arm
    • Slide the arm off the splines
  2. step : Removing the Wiper Cowl Cover (0:50)
    • Remove the T25 Torx screws from both ends of the cowl
    • Pry out the snap clips from the cowl with side cutters
    • Remove the deadening material
    • Remove the weatherstrip
    • Lift up the passenger side wiper cowl
    • Disconnect the washer hoses from their retainers
    • Remove the passenger side wiper cowl
    • Remove the clips from the driver's side
    • Remove the wiper cowl cover from the vehicle
  3. step : Removing the Wiper Motor and Linkage (2:14)
    • Disconnect the wiper motor electrical connector
    • Remove the three 10mm bolts from the wiper linkage
    • Remove the wiper motor and transmission assembly
  4. step : Installing the Wiper Motor and Linkage (2:50)
    • Change over the rubber protector piece to the new wiper motor and linkage
    • Insert the wiper motor and linkage into place
    • Tighten the three 10mm bolts to the wiper linkage
    • Connect the wiper motor electrical connector
  5. step : Installing the Wiper Cowl Cover (4:24)
    • Insert the wiper cowl into place
    • Press the clip connectors into place
    • Snap the washer hoses into the cowl cover
    • Realign the passenger side cowl cover
    • Insert the weatherstrip into the cowl
    • Tighten the two T25 Torx screws
  6. step : Reinstalling the Wiper Arms (5:49)
    • Press the arm onto the splines
    • Close the clip
    • Lay the wiper arm down

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:15 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver



This part replaces:

  • Mopar 5127710AA, 68043386AC
  • OE # 68043386AC
  • OE # 5127710AA

Vehicle Fit

  • 2002-2005 Dodge Ram 1500 Truck Wiper Motor, Linkage, & Jumper Harness for Models with Rectangle Plug Mopar 5127710AA, 68043386AC
  • 2002-2005 Dodge Ram 2500 Truck Wiper Motor, Linkage, & Jumper Harness for Models with Rectangle Plug Mopar 5127710AA, 68043386AC
  • 2002-2005 Dodge Ram 3500 Truck Wiper Motor, Linkage, & Jumper Harness for Models with Rectangle Plug Mopar 5127710AA, 68043386AC
Only 2 left in stock
Part #: MPERK00002

Ships Same Day for orders placed by 4 P.M. ET

Brand #: 5127710AA, 68043386AC

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More